| 石墨的铜包覆量对自润滑材料的性能影响 |
| |
| 引用本文： | 张晓丹,崔云涛,马捷,章德铭.石墨的铜包覆量对自润滑材料的性能影响[J].有色金属(冶炼部分),2016(1):53-57. |
| |
| 作者姓名： | 张晓丹 崔云涛 马捷 章德铭 |
| |
| 作者单位： | 北京工业大学材料科学与工程学院 北京,北矿新材科技有限公司 北京,北京工业大学材料科学与工程学院 北京,北矿新材科技有限公司 北京 |
| |
| 基金项目： | “十二五”国家科技支撑计划项目(2013BAE04B05) |
| |
| 摘 要： | 采用粉末冶金方法,选取铜质量分数分别为30%和60%的铜包石墨与铜粉制备铜基石墨自润滑材料,并对不同包覆量的石墨制备的固体自润滑材料的性能进行分析。结果表明,铜包覆量为30%的石墨制成的固体自润滑材料在20N载荷下的最小摩擦因数为0.13,对应的抗压强度为192 MPa,力学性能和摩擦磨损性能好;选用包覆含量为30%的铜包石墨可以与铜粉制成减摩润滑效果好且力学性能优的固体自润滑材料。
|
| 关 键 词： | 铜包石墨 包覆含量 固体自润滑 摩擦磨损性能 |
| 收稿时间： | 2015/10/16 0:00:00 |
| 修稿时间： | 2015/10/26 0:00:00 |
Effect of Coating Content of Copper-coated Graphite on Property of Self-lubricating Materials |
| |
| ZHANG Xiao-dan,CUI Yun-tao,MA Jie and ZHANG De-ming.Effect of Coating Content of Copper-coated Graphite on Property of Self-lubricating Materials[J].Nonferrous Metals(Extractive Metallurgy),2016(1):53-57. |
| |
| Authors: | ZHANG Xiao-dan CUI Yun-tao MA Jie and ZHANG De-ming |
| |
| Affiliation: | College of Materials Science and Engineering,Beijing University of Technology,,, |
| |
| Abstract: | Copper matrix-graphite self-lubricating materials were prepared by powder metallurgy applying copper-coated graphite powders with copper mass fraction of 30% and 60% respectively and copper powders as raw materials. The properties of solid self-lubricating materials with different coating content of copper-coated graphite were investigated. The results show that the minimum friction coefficient of solid self-lubricating composite materials at 20 N loading made by 30% coating content copper-coated graphite is 0.13, and compressive strength is 192 MPa. The composites with better self-lubricating properties and mechanical properties can be maintained by coating content of 30% copper-coated graphite. |
| |
| Keywords: | copper-coated graphite coating content self-lubricating friction and wear behaviors |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息 |
|
点击此处可从《有色金属(冶炼部分)》下载全文 |
