首页 | 官方网站   微博 | 高级检索  
     

基于采场充填接顶率与充填体承载性能的研究
引用本文:陆玉根,陈建宏,蒋权,陈庆刚.基于采场充填接顶率与充填体承载性能的研究[J].矿业研究与开发,2011(5):18-21.
作者姓名:陆玉根  陈建宏  蒋权  陈庆刚
作者单位:中南大学资源与安全工程学院;湖南省深部金属矿产开发与灾害控制重点实验室;
基金项目:国家自然科学基金资助项目(50774092); 全国优秀博士学位论文专项资金资助项目(200449)
摘    要:针对矿山充填接顶困难、充填体承载强度不足等难题,建立了充填接顶率与顶板岩层中最大Mises应力强度的回归模型,探讨了两者之间的定量关系。通过对新桥矿实测数据模拟,发现它们之间存在着显著的线性相关关系。研究表明,当充填接顶率达到50%以上时,充填体强度即可满足要求,从而大大降低了充填成本,对指导矿山接顶充填具有重要意义。

关 键 词:充填接顶  承载强度  Mises应力强度  充填采矿

Research on the Rate of Roof-contacted Filling and the Load-bearing Properties of Filling Body
LU Yugen ,CHEN Jianhong ,JIANG Quan ,CHEN Qinggang.Research on the Rate of Roof-contacted Filling and the Load-bearing Properties of Filling Body[J].Mining Research and Development,2011(5):18-21.
Authors:LU Yugen    CHEN Jianhong  JIANG Quan  CHEN Qinggang
Affiliation:LU Yugen 1,2,CHEN Jianhong 1,JIANG Quan 1,CHEN Qinggang,(1.School of Resources and Safety Engineering,Central South University,Changsha,Hunan 4100083,China,2.Hunan Key Laboratory of Mineral Resources Exploitation and Hazard Control for Deep Metal Mines,Hunan 410083,China)
Abstract:In accordance with some problems in mines,such as difficulty in roof-contacted filling,unsatisfactory load-bearing capacity of filling body and so on,a regression analysis method is established to determine the quantitative relationship between the rate of roof-contacted filling and the maximum Mises stress intensity in roof rock masses.Through the regression analysis of some measured data from Xinqiao mine,obvious linear relationship between the rate of roof-contacted filling and the maximum Mises stress i...
Keywords:Roof-contacted filling  Load-bearing strength  Mises stress intensity  Stoping and filling method  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号