首页 | 官方网站   微博 | 高级检索  
     

工业废渣在煤燃烧中固硫的影响因素分析
引用本文:翁卫国,周俊虎,程军,曹欣玉,岑可法.工业废渣在煤燃烧中固硫的影响因素分析[J].煤炭学报,2005,30(4):480-483.
作者姓名:翁卫国  周俊虎  程军  曹欣玉  岑可法
作者单位:浙江大学 能源洁净利用与环境工程教育部重点实验室,浙江 杭州 310027
基金项目:国家重点基础研究发展计划项目(2004CB217701);国家高技术研究发展计划项目(2002AA529122)
摘    要:采用正交试验法,研究了4种因素对煤高温燃烧固硫效率的影响,发现原煤硫分影响最显著,钙硫比影响十分显著,石灰石与电石渣的成分配比影响较显著,而钢渣以及各因子间的交互作用影响甚微.通过方差统计得到一组最佳实验条件:原煤硫分为4%,钙硫比为2,石灰石与电石渣的质量配比为60∶40,钢渣添加量为0.6%,在炉温1 200 ℃下得到52%的燃煤固硫率.

关 键 词:煤燃烧  固硫  添加剂  工业废渣
文章编号:0253-9993(2005)04-0480-04
收稿时间:2004-10-29
修稿时间:2004年10月29

Influence factors on sulfation reactions of industrial wastes in coal combustion
WENG Wei-guo,ZHOU Jun-hu,CHENG Jun,CAO Xin-yu,CEN Ke-fa.Influence factors on sulfation reactions of industrial wastes in coal combustion[J].Journal of China Coal Society,2005,30(4):480-483.
Authors:WENG Wei-guo  ZHOU Jun-hu  CHENG Jun  CAO Xin-yu  CEN Ke-fa
Abstract:Four influence factors on sulfation reactions of industrial wastes in coal combustion were studied by a series of orthogonal experiments It is found that the initial sulfur content in coal (S t,ad) is the most prominent influence factor and the next is the molar ratio of calcium to sulfur (Ca/S). The weight ratio of limestone to carbide lime in the sorbent (L/C) takes the third place,while the addition percentage of steel residue (P sr) and the interactions of different factors have small influences The best experimental condition is as the flowing: w(S t,ad)=4%,n(Ca)/n(S)=2,n(L)/n(C)=60∶40, w(P sr)=0.6% The highest sulfur retention efficiency of 52% was obtained in coal combustion at the furnace temperature of 1 200 ℃
Keywords:coal combustion  sulfation  sorbents  industrial wastes
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《煤炭学报》浏览原始摘要信息
点击此处可从《煤炭学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号