| Abstract: | The main goal of this article is to present the translation of quality of service (QoS) parameters between layers. The QoS parameters in the ATM layer and AAL are defined. This translation concept came from the QoS framework in which the influence of the protocol stack on the QoS should be considered. As an example, we concentrate on the translation from the AAL to the ATM layer, as the AAL must be designed to be service-dependent and specific. Translation, both taking the transport protocol into account as well as between application and transport QoS, needs further study. However, our study shows that the QoS translation is a possible and good approach in end-to-end QoS guarantees in the broadband integrated services digital network (B-ISDN). As far as the end-to-end QoS guarantee issue is concerned, the transport QoS requirements are specified in terms of bounds on transport QoS parameters. The bounds on transport QoS parameters will be translated into the bounds on ATM layer QoS parameters. The ATM-layer QoS parameters resulting from the translation will be the performance requirements on a connection basis for the ATM network, but are basically the end-to-end parameters, including the network and the end systems. Therefore, the QoS translation finally results in the network performance parameters in the ATM network. We define QoS parameters in the AAL and ATM layer. Case studies in which the translation method is applied to a constant bit rate (CBR) video service and data service, respectively, are also presented |
