首页 | 官方网站   微博 | 高级检索  
     

微结构光纤的有限元分析计算法
引用本文:胡明列,王清月,栗岩锋.微结构光纤的有限元分析计算法[J].中国激光,2004,31(11):337-1342.
作者姓名:胡明列  王清月  栗岩锋
作者单位:天津大学精密仪器与光电子工程学院超快激光研究室光电信息技术科学教育部重点实验室,天津,300072
基金项目:国家973计划(编号:G1999075201,2003CB314904),国家自然科学基金(编号:60278003),国家863计划(编号:2003AA311010)资助项目。
摘    要:利用有限元法对零色散点在780nm的均匀微结构光纤进行经过简化的矢量波动方程模拟计算,获得了所需要的模场分布、有效折射率、色散、有效模面积等参数,并与实验数据相参照验证了这种方法的准确性和精度。进而将这种计算方法用于非均匀微结构光纤的模拟计算,不仅获得了很好的结果,与其他方法相比还具有更快的计算速度,计算所得到的结果对将来设计和拉制微结构光纤很有帮助,并且这种方法在设计不规则的微结构光纤方面具有很好的优势。

关 键 词:光电子学  光子晶体光纤  微结构光纤  有限元法
收稿时间:2003/8/29

Analysis of the Microstructure Fiber by the Finite Element Method
HU Ming lie,WANG Qing yue,LI Yan feng.Analysis of the Microstructure Fiber by the Finite Element Method[J].Chinese Journal of Lasers,2004,31(11):337-1342.
Authors:HU Ming lie  WANG Qing yue  LI Yan feng
Abstract:The guiding problem in microstructure fiber with 780 nm zero dispersion wavelength is accurately analyzed through a reduced vector wave equation, using a novel finite element method (FEM). The two dimensional transverse intensity distribution of the fundamental mode, the effective refractive index, dispersion curves of guided modes for different fiber structural parameters are calculated. The results match those achieved in recent experiments in which the feasibility of this type of fiber was shown. Furthermore, this method is used for simulating the random distributed microstructure fiber, and a reasonable result is gotten rapidly and accurately.
Keywords:optoelectronics  photonic crystal fiber  microstructure fiber  finite element method
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号