首页 | 官方网站   微博 | 高级检索  
     

三相整流桥PFC电路拓扑的分析及控制
引用本文:陈贤明,吕宏水,刘国华,王伟,朱晓东.三相整流桥PFC电路拓扑的分析及控制[J].电力电子,2009(6):25-30.
作者姓名:陈贤明  吕宏水  刘国华  王伟  朱晓东
作者单位:国网电力科学研究院 电气控制技术研究所
摘    要:通过对三相二假管整流挢构成的功率因数校正(PFC)拓扑电路较详尽的分析,表明在无逆变功能的要求下,只需单只全控型开关元件,经脉宽州制PWM控制。在断续导通控制模式下,便可达到功率阁数接近1和交流正弦的进线电流的目的。文巾利用了单周控制和Matlab/Simulink软件,对三相二极管整流的Boost PFC电路进行了建模和仿真,得出了预期的结果.证明在原理上是可行的。此PFC电路只用一只全控型开关元件,从而可能降低设备的成本。

关 键 词:三相  PFC  电路拓扑  Boost电路  单周控制  Matlab/Simulink仿真

Circuit Topology and Control of Three-Phase PFC Rectifier Bridge
Abstract:After detail analysis of circuit topology of three-phase PFC rectifier bridge,only one fully controlled power electronic-switch device is needed,if no-requirement for inverter operation.The power factor near 1 and three-phase sinusoidal currents may be obtained if the circuit is controlled under PWM and discontinuous conductive mode.The modeling and simulation for three-phase rectifier bridge boost PFC circuit is completed with one-cycle control and Matlab/Simulink software.The simulation results show that ...
Keywords:Three-phase  PFC  Circuit topology  Boost circuit  One-cycle control  Matlab/Simulink Simulation  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号