首页 | 官方网站   微博 | 高级检索  
     

2.4GHz 0.35-μm CMOS全集成线性功率放大器设计
引用本文:张吉左,段吉海,康春雷,何芝兰,王剑锋,邓翔.2.4GHz 0.35-μm CMOS全集成线性功率放大器设计[J].电子设计工程,2011,19(7):144-146.
作者姓名:张吉左  段吉海  康春雷  何芝兰  王剑锋  邓翔
作者单位:桂林电子科技大学信息与通信学院,广西,桂林,541004
摘    要:片上系统射频功率放大器是射频前端的重要单元.通过分析和对比各类功率放大器的特点,电路采用SMIC0.35-μm CMOS工艺设计2.4 GHz WLAN全集成线性功率放大器.论文中设计的功率放大器采用不同结构的两级放大,驱动级采用共源共栅A类结构组成,输出级采用共源级大MOSFET管组成.电路采用SMIC 0.35-μ...

关 键 词:无线局域网  稳定性  负载线匹配  稳定性技术

Design of a 2.4GHz fully linear power amplifier in 0.35-μm CMOS process
ZHANG Ji-zuo,DUAN Ji-hai,KANG Chun-lei,HE Zhi-lan,WANG Jian-feng,DENG Xiang.Design of a 2.4GHz fully linear power amplifier in 0.35-μm CMOS process[J].Electronic Design Engineering,2011,19(7):144-146.
Authors:ZHANG Ji-zuo  DUAN Ji-hai  KANG Chun-lei  HE Zhi-lan  WANG Jian-feng  DENG Xiang
Affiliation:(School of Information and Communications,Guilin University of Electronic Technology,Guilin 541004,China)
Abstract:Radio frequency amplifier which made in a SOC is an important unit of the RF front end.After analyzing and comparing the characteristic of various power amplifiers,the circuit brings up with a design of a 2.4GHz CMOS fully integrated linear power amplifier(PA) based on a SMIC 0.35-μm CMOS technology for WLAN system.The power amplifier which designed in this paper used the differential two-stage structure.The drive stage is made up of cascade class-A topology,a "big" MOSFET is used in the class-A output stage.The circuit performed simulation of the PA by Candence with the SMIC 0.35-μm RF CMOS model.According to the simulation results,with a supply voltage of 3.3V,the CMOS RFIC PA works steadily,the PA provides a 25dBm output power at 1dB compression point,the out power of the PA reaches to 25.22dBm when the input power of is 0dBm.
Keywords:WLAN  stability  load line matching  stability technique
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号