首页 | 官方网站   微博 | 高级检索  
     

基于偏振紫外光单次散射的非视距目标定位方法研究
引用本文:李春艳,罗豆,李庚鹏,乔琳,汤琦.基于偏振紫外光单次散射的非视距目标定位方法研究[J].光电子.激光,2022(3):296-304.
作者姓名:李春艳  罗豆  李庚鹏  乔琳  汤琦
作者单位:西安邮电大学 电子工程学院, 陕西 西安 710121,西安邮电大学 电子工程学院, 陕西 西安 710121,西安邮电大学 电子工程学院, 陕西 西安 710121,西安邮电大学 电子工程学院, 陕西 西安 710121,西安邮电大学 电子工程学院, 陕西 西安 710121
基金项目:国家自然科学基金(61805199)、 陕西省自然科学基金项目(2019JM-305), 陕西省教育厅专项科研计划项目(20JK0908)和西安邮电大学研究生创新基金项目(CXJJLZ202002)资助 项目
摘    要:本文从紫外光通信技术的发展趋势及研究背景出发 ,针对特定环境下实现目标定位的 应用需求,结合偏振光的振动特性,提出了基于偏振紫外光单次散射实现非视距目标定 位的方法。首先,基于紫外光大气散射传输特性,建立了偏振紫外光非视距单次散射模型, 利用矩阵光学的方法推导了紫外光偏振散射传输特性;建立了接收光强与方位角及收发距离 之间的关系。其次,利用Matlab软件仿真并分析了收发仰角及视场角对接收光强及方位角测 量范围的影响,选取了合适的收发仰角及视场角。根据接收信号光强随方位角的变化获得目 标方位角,并通过解算得出收发距离,理论上验证了系统可行性,并对各误差影响进行了仿 真分析,在距离500 m,收发仰角偏离(预设值25°)3°时,距离测量误差为25.3 m。噪声对光 强的影响导致方位角判定误差对测距误差的影响较小,但方位角判定误差为3°时,会引起 距 离500 m时真实位置横向偏离误差26.2 m。本 文研究结果为拓展紫外光通信系统的功能及实 际应用提供了理论基础,有一定的指导意义。

关 键 词:紫外光    偏振    光通信    单次散射    非视距    测距定位
收稿时间:2021/6/8 0:00:00

Research on non-line-of-sight target location method based on single scatteri ng of polarized ultraviolet light
LI Chunyan,LUO Dou,LI Gengpeng,QIAO Lin and TANG Qi.Research on non-line-of-sight target location method based on single scatteri ng of polarized ultraviolet light[J].Journal of Optoelectronics·laser,2022(3):296-304.
Authors:LI Chunyan  LUO Dou  LI Gengpeng  QIAO Lin and TANG Qi
Abstract:This paper starts from the development trend and research background of ultraviolet (UV) optical communication technology,for the application requirements of target localizatio n in specific environments,a method based on single scattering of polarized ultraviolet light to achieve non-line-of-sight target localization is proposed by combining the vibration direction characteristics of polarized light.Firstly,based on the UV atmospheric scatterin g transmission characteristics,a polarized UV non-line-of-sight single scattering model is established,and the polarization scattering propagation characteristics of ultraviolet light is der ived by the method of matrix optics.The relationship between the received light intensity and azimuth angle and distance between transmitter and receiver is established.Then,the Matlab software is us ed to simulate and analyze the effect of transmitter and receiver elevation angle and field of view angle on the received light intensity and azimuth angle measurement range,and the suitable t ransmitter and receiver elevation angle and field of view angle are selected.The azimuth angl e of the target is obtained according to the change of the light intensity of the received signal w ith the azimuth,and the distance between transmitter and receiver is calculated.In theory,the feasi bility of the system is verified,and the simulations and analyses of each error influence are carried out.At a distance of 500m,the distance measurement error is 25.3m when the transmitter and receiver elevation angle deviates 3° (preset value 25°).The influence of noise on the light intensity leads to the azimuth angle determination error to have a small effect on the ranging error,but the a zimuth angle determination error of 3° can cause a lateral deviation error of 26.2m from t he true position at a distance of 500m,thus improvement measures are proposed.The results of this pa per provide a theoretical basis for expanding the functions and practical applic ations of UV optical communication systems and have certainguiding significance.
Keywords:ultraviolet  polarization  optical communication  single scattering  non-line- of-sight  ranging and positioning
点击此处可从《光电子.激光》浏览原始摘要信息
点击此处可从《光电子.激光》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号