| 基于工业CT的水泵叶轮三维实体重建 |
| |
| 引用本文： | 蒋小平,施卫东,李伟,刘厚林,谈明高.基于工业CT的水泵叶轮三维实体重建[J].农业机械学报,2011,42(11):85-88,67. |
| |
| 作者姓名： | 蒋小平 施卫东 李伟 刘厚林 谈明高 |
| |
| 作者单位： | 江苏大学流体机械工程技术研究中心,镇江,212013 |
| |
| 基金项目： | 江苏省科技支撑计划资助项目（BE2010116）;江苏高校优势学科建设工程资助项目(PAPD);江苏大学高级人才启动基金资助项目（1281440007） |
| |
| 摘 要： | 为实现水泵叶轮三维实体重建,利用工业CT获取含有叶轮原型内部构造信息的高精度断层切片图像,并编程实现切片图像RAW数据格式到BMP格式的转换.在VC++6.0平台上,应用MFC、OpenGL、ADO等,通过断层图像预处理、二维图像处理及二维几何处理等数字图像处理技术去除图像噪声并显著提高了图像清晰度；编程完成了叶轮断层...
|
| 关 键 词： | 水泵 叶轮 工业CT 边界模型 三维重建 |
3D Model Rebuilding of Pumps Impeller Based on ICT |
| |
| Jiang Xiaoping,Shi Weidong,Li Wei,Liu Houlin and Tan Minggao.3D Model Rebuilding of Pumps Impeller Based on ICT[J].Transactions of the Chinese Society of Agricultural Machinery,2011,42(11):85-88,67. |
| |
| Authors: | Jiang Xiaoping Shi Weidong Li Wei Liu Houlin and Tan Minggao |
| |
| Affiliation: | Jiangsu University;Jiangsu University;Jiangsu University;Jiangsu University;Jiangsu University |
| |
| Abstract: | In order to rebuild 3D models of pump impeller,ICT fault images in high quality of two typical impellers were collected at first,and format conversion from RAW to BMP was fulfilled though a developed program.On the platform of VC++ 6.0,MFC,OpenGL,ADO were used,and with the technologies of fault images pre-processing,2D image processing and 2D geometric processing,noise to these images was removed and image definition was greatly improved.Development tools like 3D model in surface were reconstructed,transfor... |
| |
| Keywords: | Pump Impeller ICT Boundary representation model Reconstruction of 3D models |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
|
点击此处可从《农业机械学报》下载全文 |
|
