| 激光快速成型TC4合金显微组织及力学性能 |
| |
| 引用本文： | 刘静,刘逸婷.激光快速成型TC4合金显微组织及力学性能[J].东北大学学报(自然科学版),2018,39(8):1132-1136. |
| |
| 作者姓名： | 刘静 刘逸婷 |
| |
| 作者单位： | (东北大学 理学院， 辽宁 沈阳110819) |
| |
| 基金项目： | 国家自然科学基金资助项目(51690161).国家自然科学基金资助项目(51171041). |
| |
| 摘 要： | 采用金相显微镜、扫描电镜、电子拉伸机等，研究了激光快速成型TC4合金沉积态在平行沉积方向和垂直沉积方向的组织和力学性能.结果表明:激光快速成型TC4合金沉积态宏观组织沿沉积方向生长的粗大β柱状晶呈明暗相间的条带状结构，具备典型的魏氏组织特征;垂直沉积方向的强度比平行沉积方向的强度高，但塑性低;合金断口为韧窝状断口，垂直沉积方向的断口韧窝尺寸比平行沉积方向的小.
|
| 关 键 词： | 激光快速成型 TC4合金 显微组织 力学性能 |
Microstructures and Mechanical Properties of Laser Rapid Prototyping Deposited TC4 Alloy |
| |
| LIU Jing,LIU Yi-ting.Microstructures and Mechanical Properties of Laser Rapid Prototyping Deposited TC4 Alloy[J].Journal of Northeastern University(Natural Science),2018,39(8):1132-1136. |
| |
| Authors: | LIU Jing LIU Yi-ting |
| |
| Affiliation: | School of Sciences， Northeastern University， Shenyang 110819， China. |
| |
| Abstract: | Microstructures and mechanical properties of laser rapid prototyping deposited TC4 alloy in the parallel and vertical directions were studied by metallographic microscope， scanning electron microscopy and electronic tensile testing machine. The results showed that the β grains growing in the deposited direction are coarse and columnar， which shows a bright and dark strip structure and is typical Widmanstatten structure. The strength vertical to deposition direction is higher than that parallel with deposition direction， but the plasticity is low. The fracture of the alloy is dimple fracture， and the size of the dimples on the fracture vertical to deposition direction is smaller than that parallel with deposition direction. |
| |
| Keywords: | laser rapid prototyping TC4 alloy microstructure mechanical property |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《东北大学学报(自然科学版)》下载全文 |
