首页 | 官方网站   微博 | 高级检索  
     

苯乙烯聚合反应挤出过程中停留时间及其分布
引用本文:张鹰,司林旭,郑安呐,朱中南.苯乙烯聚合反应挤出过程中停留时间及其分布[J].华东理工大学学报(自然科学版),2002,28(5):506-510.
作者姓名:张鹰  司林旭  郑安呐  朱中南
作者单位:1. 华东理工大学材料工程学院反应挤出研究室,上海,200237
2. 华东理工大学联合反应工程研究所
基金项目:国家自然科学基金项目 (2 99740 0 8)
摘    要:研究了苯乙烯单体在双螺杆挤出机中聚合反应的停留时间及其分布,结果表明,聚合过程中单体及其聚合物在双螺杆中的停留时间分布于1min-4min范围内,平均停留时间在较大程度上受螺杆的转速,进料速度,聚合物平均分子量等因素的影响,聚合反应主要发生在螺杆的600mm处,约于850mm处聚合反应完成,根据因次分析得到了平均停留时间的模型,实验表明该模型与实测结果吻合。

关 键 词:苯乙烯  聚合反应  挤出过程  停留时间  双螺杆挤出机  示踪剂  时间分布
文章编号:1006-3080(2002)05-0506-05
修稿时间:2001年10月10

Residence Time and Its Distribution During the Reactive Extrusion Processing for the Bulk Polymerization of Styrene
ZHANG Ying ,SI Lin xu ,ZHENG An na ,ZHU Zhong nan.Residence Time and Its Distribution During the Reactive Extrusion Processing for the Bulk Polymerization of Styrene[J].Journal of East China University of Science and Technology,2002,28(5):506-510.
Authors:ZHANG Ying  SI Lin xu  ZHENG An na  ZHU Zhong nan
Affiliation:ZHANG Ying 1,SI Lin xu 1,ZHENG An na 1*,ZHU Zhong nan 2
Abstract:The residence time and its distribution during the bulk p olymerization of styrene in a twin screw extruder were investigated. It is found that the residence time of the reagents in the twin screw extruder covers t he r ange from 1 min to 4 min. Furthermore, the residence time is grea tly affected by the rotation speed, the feed speed and average molecular weight of the polymer. It is also found that the polymerization mainly generates at the zone on the screw about 60 cm length from initial position and fully completes at th at about 85 cm length. Based on dimensional analysis, a model o f the residence time has been established, which is confirmed by the results of realistic measurements.
Keywords:styrene  polymerization  reactive extrusion  residence tim e
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号