| 子午线轮胎静态接触的有限元分析 |
| |
| 引用本文： | 薛隆泉,张红军,刘荣昌,王玉秋,王慧武.子午线轮胎静态接触的有限元分析[J].河北科技师范学院学报,2005,19(1):15-18. |
| |
| 作者姓名： | 薛隆泉 张红军 刘荣昌 王玉秋 王慧武 |
| |
| 作者单位： | 西安理工大学,机械与精密仪器工程学院,陕西,西安,710048;河北科技师范学院,机械电子系 |
| |
| 摘 要： | 采用ANSYS软件非线性分析技术，通过三维体单元、层单元和接触单元，建立了60系列的R15型子午线轮胎的三维有限元模型。根据相对运动的原理，使用Pilot节点控制刚性目标面压向轮胎，得到了在接触过程中的轮胎各部位的变形和应力情况，为进一步进行子午线轮胎的动态接触分析和结构优化设计奠定了基础。
|
| 关 键 词： | 子午线轮胎 非线性分析 接触单元 Pilot节点 ANSYS |
| 文章编号： | 1672-7983(2005)01-0015-03 |
| 修稿时间： | 2004年11月18 |
Finite Element Analysis on Contact-Sliding Model of Radial Tyre |
| |
| XUE Long-quan,ZHANG Hong-jun,LIU Rong-chang,WANG Yu-qiu,WANG HUI-WU.Finite Element Analysis on Contact-Sliding Model of Radial Tyre[J].Journal of Hebei Normal University of Science & Technology,2005,19(1):15-18. |
| |
| Authors: | XUE Long-quan ZHANG Hong-jun LIU Rong-chang WANG Yu-qiu WANG HUI-WU |
| |
| Affiliation: | XUE Long-quan~1,ZHANG Hong-jun~1,LIU Rong-chang~2,WANG Yu-qiu~1,WANG Hui-wu~1 |
| |
| Abstract: | Using the Non-linear analysis technology of ANSYS software,the three-dimension finite element model of radial tyre is built with 3D volume element,layer element and contacting element.According to the theory of relative moving,contact conditions between charged tyre and ground are obtained by using pilot node to control the moving of rigid-target surface,thus,the distribution status of contact moulage in diversified conditions and distortion status of the tyre in the different position are accepted.The result is very helpful for further dynamic contact analysis by using the pilot node and optimum design for the radial tyre. |
| |
| Keywords: | Radial tyre Non-linear analysis Contact element Pilot node ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
