首页 | 官方网站   微博 | 高级检索  
     

聚丙烯酸高碳醇酯降凝行为研究
引用本文:王乐启,胡道道.聚丙烯酸高碳醇酯降凝行为研究[J].西安石油大学学报(自然科学版),2007,22(6):68-73.
作者姓名:王乐启  胡道道
作者单位:陕西师范大学,化学与材料科学学院陕西省大分子科学重点实验室,陕西,西安,710062
摘    要:对给定正构烷烃碳链长度集中在碳数14的柴油而言,聚丙烯酸十四酯由于其烷基侧链长度与柴油中正构烷烃碳链长度匹配而表现出良好的降凝性能.聚合反应条件不同会直接影响高分子的相对分子质量分布,从而使高分子表现出不同的降凝性能.通过正交实验对制备聚丙烯酸十四脂的实验条件进行了优化,在最佳实验条件下,合成的聚丙烯酸十四酯对给定柴油的冷滤点最大降低值为6℃,凝点最大降低值为18℃.光学显微镜观察结果表明:降凝剂的降凝行为与其对蜡晶结晶的分割有关.降凝剂较少时,高分子具有分割蜡晶晶核的作用;降凝剂适量时,高分子产生晶核使蜡晶结晶细化且分散.后者晶型的结构特点对应着良好的降凝性能.

关 键 词:降凝剂  丙烯酸高碳酯  柴油  蜡晶
文章编号:1673-064X(2007)06-0068-06
修稿时间:2007年4月2日

Studies on the effect of polyacrylate (high carbon alcohol) on pour point of diesel
WANG Le-qi,HU Dao-dao.Studies on the effect of polyacrylate (high carbon alcohol) on pour point of diesel[J].Journal of Xian Shiyou University,2007,22(6):68-73.
Authors:WANG Le-qi  HU Dao-dao
Abstract:Poly(tetradecyl acrylate)(PA-14) has a good pour point depressing performance to the diesel oil whose carbon number is near to 14 because the side chain length of its alkyl matches with the carbon chain length of the normal alkane in the diesel oil.Polymerization conditions directly influence the relative molecular mass distribution of polymer and therefore influence its pour point depressing performance to the diesel oil.The polymerization conditions are optimized by orthogonal experiments,and the PA-14 prepared under the best conditions can make the solidifying point depression(SP) and cold filter plugging point(CFPP) of the diesel oil decrease 18 ℃ and 6 ℃ respectively.The optical microscope observation results of wax crystallite morphology show that the pour point depressing behavior of the pour point depressant may be related to the thinning of the wax crystal by the polymer as crystal nucleus.
Keywords:pour point depressant  poly(alkyl acrylates)  diesel oil  wax crystal
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号