首页 | 官方网站   微博 | 高级检索  
     

双层辉光离子渗W-Mo后析出物TTT图测定
引用本文:赵斌,吴建生,李忠厚,刘小萍,高原,徐重.双层辉光离子渗W-Mo后析出物TTT图测定[J].中国有色金属学报,2000,10(5):676-679.
作者姓名:赵斌  吴建生  李忠厚  刘小萍  高原  徐重
作者单位:上海交通大学材料科学与工程学院!上海200030(赵斌,吴建生),太原理工大学表面工程研究所!太原030024(李忠厚,刘小萍,高原,徐重)
摘    要:双层辉光离子渗W Mo后由于冷却速度缓慢 ,渗层中尤其在晶界上出现大量析出物 ,造成渗层质量严重下降 ,虽后经固溶处理 ,但由于其组织遗传等原因 ,依然造成不良影响。针对这个问题 ,首先采用恒电流电解萃取析出物 ,然后用X射线衍射法对析出物进行定性分析 ,结果表明析出物主要为 μ相 ;其次应用金相法和定量金相分析仪测定了析出相的等温转变动力学图 ,该图表明析出相分别在 950℃和 1 1 50℃达到转变高峰 ,孕育期分别为 6~ 8min和 4~ 5min。

关 键 词:双层辉光离子  渗W-Mo  μ相  TTT图

Determination of TTT diagram of precipitates in diffusing layer after double glow plasma surface alloying with tungsten-molybdenum
ZHAO Bin ,WU Jian sheng ,LI Zhong hou ,LIU Xiao ping ,GAO Yuan ,XU Zhong.Determination of TTT diagram of precipitates in diffusing layer after double glow plasma surface alloying with tungsten-molybdenum[J].The Chinese Journal of Nonferrous Metals,2000,10(5):676-679.
Authors:ZHAO Bin  WU Jian sheng  LI Zhong hou  LIU Xiao ping  GAO Yuan  XU Zhong
Affiliation:ZHAO Bin 1,WU Jian sheng 1,LI Zhong hou 2,LIU Xiao ping 2,GAO Yuan 2,XU Zhong 2
Abstract:Because of the slow cooling speed after 20 steel alloyed by W Mo plasma, a lot of precipitation is produced in the W Mo alloying layers, especially at the grain boundaries. In spite of the solution heat treatment, the layer quality is negatively influenced due to microstructure inheritance. In order to get rid of or restrain the formation of the precipitated phases, the following work has been done: qualitative phase analysis of the precipitates by X ray diffraction, examination of their isotherms by means of quantitative metallographic analyzer and analysis of SEM images of the precipitation.
Keywords:
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号