| 车用二甲醚橡胶密封件相容性 |
| |
| 引用本文： | 杨眉敏，张武高，浦耿强，黄震.车用二甲醚橡胶密封件相容性[J].上海交通大学学报,2010,44(10):1322-1326. |
| |
| 作者姓名： | 杨眉敏，张武高，浦耿强，黄震 |
| |
| 作者单位： | (上海交通大学 动力机械与工程教育部重点实验室， 上海 200240)
|
| |
| 摘 要： | 针对二甲醚(DME)发动机动密封部位必须采用的弹性密封材料,深入展开了车用DME与橡胶密封材料的相容性研究.试验测试了不同橡胶材料耐受DME介质的能力,比较分析了各类材料在DME中浸泡72 h前后的体积与质量变化率,并对比了浸泡前后的拉伸强度、撕裂强度、硬度等力学性能.结果表明:三元乙丙橡胶(EPDM)具有相对良好的耐受DME的能力;车用DME中杂质含量、润滑添加剂成分及比例、EPDM材料组分对EPDM耐受DME性能存在一定影响;当DME发动机燃油系统标定采用车用柴油标定时,EPDM短期内耐车用柴油能力处于可接受的范围.
|
| 关 键 词： | 二甲醚 橡胶 密封 三元乙丙橡胶 |
| 收稿时间： | 2009-11-5 |
On Compatibility of Engine Seal Parts with Dimethyl Ether |
| |
YANG Mei min,ZHANG Wu gao,PU Geng qiang,HUANG Zhen
.On Compatibility of Engine Seal Parts with Dimethyl Ether[J].Journal of Shanghai Jiaotong University,2010,44(10):1322-1326. |
| |
| Authors: | YANG Mei min ZHANG Wu gao PU Geng qiang HUANG Zhen
|
| |
| Affiliation: | (Key Laboratory for Power Machinery and Engineering of Ministry of Education, Shanghai Jiaotong University, Shanghai 200240, China)
|
| |
| Abstract: | Dimethyl ether as fuel for compression ignition engines causes compatibility problem between seal parts and fuel in engine fuel system. The compatibility of seal materials with DME was deeply investigated. Many kinds of rubber materials were chosen to test the expansion, the tensile strength, the tear strength and the hardness. The experimental results show that EPDM has a good resistance to DME; the purity of DME, various lubricant additives and concentrations in DME, different constitutions of EPDM rubber have a certain impact on the resistance of EPDM to DME; and the chosen EPDM has an acceptable volume swelling rate and mechanical performance in a short time when using diesel to adjust high pressure oil pump for fuel DME uniformity in every cylinder. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海交通大学学报》浏览原始摘要信息 |
|
点击此处可从《上海交通大学学报》下载全文 |
|
