|
|||||
|
|
| 内啮合摆线转子压缩机缸体支撑力位置理论研究 | |
| 引用本文： | 冯诗愚,朱冬生,高秀峰,李云,刘卫华.内啮合摆线转子压缩机缸体支撑力位置理论研究[J].西安交通大学学报,2007,41(11):1257-1261. |
| 作者姓名： | 冯诗愚 朱冬生 高秀峰 李云 刘卫华 |
| 作者单位： | 1. 西安交通大学能源与动力工程学院,710049,西安 2. 柳州柳二空机械股份有限公司,545004,柳州 3. 南京航空航天大学航空宇航学院,210016,南京 |
| 摘 要： | 为了限制内啮合摆线转子压缩机中外转子绕内转子公转的趋势,在外转子上施加一个支撑力,对支撑力的位置进行了详细分析.研究结果表明,内啮合摆线转子压缩机中支撑力的方向和位置完全是由几何关系决定的,而与气体力、接触力等无关,因此在对该压缩机进行受力分析时,必须首先确定支撑力位置,然后再计算支撑力和接触力.该研究可为内啮合摆线转子压缩机的动力学设计提供参数. |
| 关 键 词： | 内啮合 转子压缩机 气体力 支撑力 |
| 文章编号： | 0253-987X（2007）11-1257-05 |
| 修稿时间： | 2007-03-01 |
Position of Support Force on Cylinder in Internal-Meshing Cycloid Rotary Compressor |
|
| Feng Shiyu,Zhu Dongsheng,Gao Xiufeng,Li Yun,Liu Weihua.Position of Support Force on Cylinder in Internal-Meshing Cycloid Rotary Compressor[J].Journal of Xi'an Jiaotong University,2007,41(11):1257-1261. | |
| Authors: | Feng Shiyu Zhu Dongsheng Gao Xiufeng Li Yun Liu Weihua |
| Abstract: | The outer rotor has the trend of revolution along the inner rotor and this trend must be overcome by the cylinder via the action of a support force in an internal-meshing rotary cycloid compressor.The position of the support force was analyzed with certain simplification by applying tolerance or clearance of all meshing surfaces.The result shows that the direction and position of the support are only determined by the geometric relationship instead of the gas force and contact force.It is suggested that the position of the support force should be firstly obtained before the calculation of the support force and contact force. |
| Keywords: | internal-meshing rotary compressor gas force support force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
