| 炭纤维增强热塑性工程塑料的研制 |
| |
| 引用本文： | 张永明,王占武.炭纤维增强热塑性工程塑料的研制[J].炭素技术,1998(4):13-15. |
| |
| 作者姓名： | 张永明 王占武 |
| |
| 作者单位： | 吉林炭素集团有限责任公司!吉林，132002 |
| |
| 摘 要： | 研究炭纤维在尼龙、聚甲醛两种工程塑料中的含量对复合材料抗拉强度、冲击强度及耐磨性的影响，并利用扫描电子显微镜观察复合材料的界面结构。结果表明，在CF／PA1010复合材料中，当炭纤维含量达到30％时，抗拉强度达到127．6MPa，耐磨性显著提高。
|
| 关 键 词： | 炭纤维 工程塑料 界面结构 |
MANUFACTURE OF THE CARBON FIBERS REINFORCED THERMOPLASTIC ENGINEERING-PLASTICS |
| |
| Zhang Yongming,Wang Zhanwu,Cao Xiujie,Zhao Min.MANUFACTURE OF THE CARBON FIBERS REINFORCED THERMOPLASTIC ENGINEERING-PLASTICS[J].Carbon Techniques,1998(4):13-15. |
| |
| Authors: | Zhang Yongming Wang Zhanwu Cao Xiujie Zhao Min |
| |
| Abstract: | The effects of carbon fiber content in CF/PA1010 CF/PM on their tensile strength, impact strength and wear-resistance were investigated, The interface structures of the composites were characterized by SEM. The results show that when the content of carbon fibers is 30%, the tensile strength of CF/PA1010 comes up 127. 6MPa, the wear-resistance is improved substantially. |
| |
| Keywords: | Carbon fiber engineering-plasties interface structure |
| 本文献已被 CNKI 维普 等数据库收录！ |
