| 基于MOLDFLOW的一种整体按键注塑模设计方案研究 |
| |
| 引用本文： | 罗纲.基于MOLDFLOW的一种整体按键注塑模设计方案研究[J].成都纺织高等专科学校学报,2014(3):28-31,46. |
| |
| 作者姓名： | 罗纲 |
| |
| 作者单位： | 成都纺织高等专科学校,四川成都611731 |
| |
| 摘 要： | 基于分析了一种整体按键成型工艺性,并运用UG对塑件三维模型进行了塑件壁厚分析,再基于MOLDFLOW对塑件进行了最优浇口位置、料流状态、充填时间、翘曲变形、注塑压力变化等进行了分析;运用UG MOLDWIZARD设计了塑件注塑模,并根据试模结果指出运用UG及MOLDFLOW协作完成注塑件三维模具设计具有实用、高效、经济等优点。
|
| 关 键 词： | 壁厚 成型 模具 充填 |
Design Research of Key Mold Based on MOLDFLOW |
| |
| LUO Gang.Design Research of Key Mold Based on MOLDFLOW[J].Journal of Chengdu Textile College,2014(3):28-31,46. |
| |
| Authors: | LUO Gang |
| |
| Affiliation: | LUO Gang ( Chengdu Textile College, Chengdu 611731 ) |
| |
| Abstract: | Based on the analysis of whole key technology molding , and using UG plastic parts of wall thickness of 3D plastic parts was analyzed by using UG , and then based on MOLDFLOW, such plastic parts indicators as optimal gate location , material flow state , the fill time and injection pressure changes and warping deformation were analyzed;plastics injection mold was design by using UG MOLDWIZARD .According to the testing molds result , a 3D mold design by using UG and MOLDFLOW to accomplish the injected plastic parts is more practical , efficient and economical . |
| |
| Keywords: | wall thickness forming mold filling |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
