| 1200mm冷轧平整机设计与实践 |
| |
| 引用本文： | 李克骞,张永林.1200mm冷轧平整机设计与实践[J].重型机械,2010(3):49-51. |
| |
| 作者姓名： | 李克骞 张永林 |
| |
| 作者单位： | 1. 中国重型机械研究院有限公司,陕西,西安,710032
2. 大连重工·起重集团有限公司设计研究院,辽宁,大连,116013 |
| |
| 摘 要： | 分析了冷轧平整机辊型配置对带钢板形的影响因素和机理,对辊型进行计算与配置,将工作辊由平辊改为中凸形,支撑辊由平辊改为边部弧线形,提高弯辊和控制板形的效率,使带钢浪形缺陷的控制水平进一步提高。
|
| 关 键 词： | 冷轧带钢 平整机 辊型 |
Design and practice of 1200 mm cold rolling temper mill |
| |
| LI Ke-qian,ZHANG Yong-lin.Design and practice of 1200 mm cold rolling temper mill[J].Heavy Machinery,2010(3):49-51. |
| |
| Authors: | LI Ke-qian ZHANG Yong-lin |
| |
| Affiliation: | 1. China National Heavy Machinery Research Institute Co. , Ltd. , Xi＇an 710032, China; 2. DHI · DCW Group Co. , Ltd. , Design ＆ Research Institute, Dalian 116013, China) |
| |
| Abstract: | The influence of the roll configuration of cold rolling temper mill on the strip shape and its mechanism were analyzed, and the roll shape was calculated and re-configured. The work roll was changed from fiat to camber, and the backup roll was changed from flat to curved on edge, increasing the efficiency of bend rolls, control strip shape and reducing the wave flaws of strips. |
| |
| Keywords: | cold rolled strip temper mill roll shape |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
