| 风力发电机塔筒顶部法兰的有限元分析 |
| |
| 引用本文： | 杜静,常慧英,石秉楠.风力发电机塔筒顶部法兰的有限元分析[J].现代制造工程,2010(4). |
| |
| 作者姓名： | 杜静 常慧英 石秉楠 |
| |
| 作者单位： | 重庆大学机械传动国家重点实验室,重庆,400030 |
| |
| 基金项目： | 重庆科技攻关重点项目 |
| |
| 摘 要： | 使用非线性有限元软件MSC.Marc/Mentat建立风力发电机塔筒顶部法兰联接的有限元模型,施加合理的边界条件和载荷后,通过非线性接触分析得到在预紧工况和极限工况下各组件的应力分布和变化情况,并对塔筒顶部法兰接触面进行安全性校核和塔筒顶部法兰与塔筒筒体焊缝处的疲劳寿命分析。分析结果表明,该塔筒顶部法兰的强度、安全性和焊缝处的疲劳寿命均满足设计要求,且结果为大型风力发电机法兰合理设计和性能强化提供了科学依据。
|
| 关 键 词： | 有限元法 塔筒顶部法兰 非线性接触 风力发电机 |
Finite element analysis of wind turbine tower top flange |
| |
| DU Jing,CHANG Hui-ying,SHI Bing-nan.Finite element analysis of wind turbine tower top flange[J].Modern Manufacturing Engineering,2010(4). |
| |
| Authors: | DU Jing CHANG Hui-ying SHI Bing-nan |
| |
| Affiliation: | DU Jing,CHANG Hui-ying,SHI Bing-nan (The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,China) |
| |
| Abstract: | Using nonlinear finite element software MSC.Marc/Mentat establish a FEA model of wind turbine top flange connection.Based on applying appropriate boundary condition and loads,the stress distribution and the stress variation of each component were obtained with the method of nonlinear contact analysis under the case of pre-tighten work condition and the limited condition.The analysis results indicate that the strength and security of flange and the fatigue life fillet weld meet design requirements.The result... |
| |
| Keywords: | finite element method tower top flange nonlinear contact wind turbine |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
