首页 | 官方网站   微博 | 高级检索  
     

竖直和水平圆管换热器在内热源液池内的两相换热特性
引用本文:李隆键,崔文智,王小军.竖直和水平圆管换热器在内热源液池内的两相换热特性[J].核动力工程,2009,30(4).
作者姓名:李隆键  崔文智  王小军
作者单位:1. 重庆大学动力工程学院,重庆,400044
2. 中国核动力研究设计院空泡物理和自然循环国家级重点实验室,成都,610041
基金项目:中国核动力研究设计院空泡物理和自然循环重点实验室2005年基金5148209105JW2001资助 
摘    要:针对溶液堆整体模拟试验模型的结构尺寸和运行工况,建立了内热源液池内自然对流和鼓泡驱动同时作用下竖直和水平圆管换热器的两相流动和换热模型,进行了相应的数值模拟计算.数值计算得到不同加热强度和鼓泡流量下的对流换热性能,与相应试验结果进行了比较分析.利用相似理论和量纲分析,推导了内热源液池内两相流动换热的无因次准则关系式,根据数值计算结果总结出换热Nu数的经验关系式.最后,分析比较了竖直和水平圆管换热器的两相对流换热特性,为溶液堆内换热器设计和布置提供理论参考.

关 键 词:自然对流  鼓泡驱动流  耦合传热  数值模拟

Two Phase Heat Transfer Characteristics of Horizontal and Vertical Tube Heat Exchangers in Pool with Internal Heat Source
LI Long-jian,CUI Wen-zhi,WANG Xiao-jun.Two Phase Heat Transfer Characteristics of Horizontal and Vertical Tube Heat Exchangers in Pool with Internal Heat Source[J].Nuclear Power Engineering,2009,30(4).
Authors:LI Long-jian  CUI Wen-zhi  WANG Xiao-jun
Affiliation:1. College of Power Engineering;Chongqing University;Chongqing;430030;China;2. National Key Laboratory of Bubble Physics and Natural Circulation;Nuclear Power Institute of China;Chengdu;610041;China
Abstract:Based on the geometrical structure and operation condition of test prototype of medical isotope reactor, the three-dimensional physical and mathematical models on the natural convection and bubbly driven two-phase convective heat transfer in the pool with internal heat source and with horizontal and vertical tube heat exchanger immerged were proposed, and the corresponding numerical simulation was performed. The computed heart transfer coefficients for different internal heat source and bubble flow rate wer...
Keywords:Natural convection  Bubbly driven flow  Conjugated heat transfer  Numerical simulation  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号