| 低温塑化型PVC塑溶胶用封端聚氨酯的研制 |
| |
| 引用本文： | 匡正,惠畅,项尚林,王庭慰.低温塑化型PVC塑溶胶用封端聚氨酯的研制[J].中国胶粘剂,2009,18(10). |
| |
| 作者姓名： | 匡正 惠畅 项尚林 王庭慰 |
| |
| 作者单位： | 1. 南京工业大学,江苏,南京,210009
2. 无锡市盛意合成材料有限公司,江苏,无锡,214106 |
| |
| 摘 要： | 以异佛尔酮二异氰酸酯(IPDI)、聚己二酸丁二醇酯(PBA)和丙酮肟(DMKO)等为原料合成了封端聚氨酯(BPU),并以BPU作为附着力促进剂,加入到聚氯乙烯(PVC)增塑糊中,制备出一种低温塑化型车用PVC塑溶胶。研究了BPU对车用PVC塑溶胶的附着力、拉伸强度、断裂伸长率、剪切强度和耐过烘烤性能的影响。结果表明:加入适量的BPU后,可以明显提高车用PVC塑溶胶在电泳漆板上的附着力,使塑溶胶的塑化温度降低至120℃左右;经170℃烘烤后,塑溶胶仍保持较好的附着力且不黄变,其拉伸强度、断裂伸长率和剪切强度分别提高了62%、41%和57%。
|
| 关 键 词： | 封端 聚氨酯 PVC 塑溶胶 低温塑化 附着力 |
Study on preparation of polyurethane-terminated for low temperature plastify type PVC plastisol |
| |
| KUANG Zheng,HUI Chang,XIANG Shang-lin,WANG Ting-wei.Study on preparation of polyurethane-terminated for low temperature plastify type PVC plastisol[J].China Adhesives,2009,18(10). |
| |
| Authors: | KUANG Zheng HUI Chang XIANG Shang-lin WANG Ting-wei |
| |
| Affiliation: | KUANG Zheng1,HUI Chang2,XIANG Shang-lin1,WANG Ting-wei1 (1. Nanjing University of Technology,Nanjing 210009,China,2. Wuxi Shengyi Synthetic Material Co.,Ltd.,Wuxi 214106,China) |
| |
| Abstract: | With isophorone diisocyanate(IPDI),poly(butylene adipate)(PBA),dimethyl ketoxime(DMKO) as raw materials,so a polyurethane-terminated(BPU) was synthesized. With the BPU as adhesion accelerant,so a PVC plastisol with low temperature plasticization was prepared for automobile when the BPU was introduced in PVC paste. The influences of BPU were investigated on adhesion,tensile strength,elongation at break,shear strength and over-baking performance of PVC plastisol for automobile. The results showed that the adh... |
| |
| Keywords: | PVC |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
