首页 | 官方网站   微博 | 高级检索  
     

聚苯乙烯泡沫塑料回收工艺研究
引用本文:张治国,姚凯,叶建美.聚苯乙烯泡沫塑料回收工艺研究[J].杭州应用工程技术学院学报,2010(2):120-124.
作者姓名:张治国  姚凯  叶建美
作者单位:[1]浙江科技学院轻工学院,杭州310023 [2]江苏宇翔化工有限公司,江苏盐城224555
基金项目:基金项目:浙江科技学院教学研究项目(2008-B18)
摘    要:研究了溶剂法回收聚苯乙烯泡沫塑料(EPS)的工艺,通过单因素实验考察了以甲苯/二氯甲烷为混合溶剂溶解EPS,然后通过脱溶/沉淀法工艺制备聚苯乙烯颗粒的回收工艺条件。结果表明,较佳工艺条件为甲苯/二氯甲烷混合溶剂中甲苯体积分数为80%,溶解温度40℃,EPS颗粒体积1.0cm3;脱溶法工艺中采用加水蒸馏法脱除溶剂;沉淀法工艺中,沉淀剂的用量为溶剂量的1.5倍体积,沉淀温度为室温,沉淀时间1h;EPS回收率可达98%以上。

关 键 词:溶剂  回收工艺  聚苯乙烯泡沫塑料

Research on processes of recycling waste foamed polystyrene plastics
ZHANG Zhi-guo,YAO Kai,YE Jian-mei.Research on processes of recycling waste foamed polystyrene plastics[J].Journal of Hangzhou Institute of Applied Engineering,2010(2):120-124.
Authors:ZHANG Zhi-guo  YAO Kai  YE Jian-mei
Affiliation:1. School of Light Industry, Zhejiang University of Science and Technology, Hangzhou 310023, China 2. Jiangsu Yuxiang Chemical Co. Ltd. , Yancheng 224555, China)
Abstract:Processes of recycling the waste foamed polystyrene plastics (EPS) by solvent recovery method were studied. EPS is dissolved by toluene/dichloromethane mixed solvents and then the polystyrene particles .are prepared by the desolventizing/precipitation process. The recovery process conditions were investigated through the single factor experiments. The results showed that better technical conditions: the toluene volume ratio of toluene/dichloromethane mixed solvent is 80 %, solution temperature 40℃, EPS particle size of 1.0 cm3. Desolventizing technological process used in water distillation to remove solvent. Precipitation process is as follows: the precipitation agent dosage is 1.5 times the volume of solvent, precipitation temperature is room temperature, precipitation time is lb. EPS recoveries is up to 98%.
Keywords:solvent  recycling  process  EPS
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号