Modeling of thermal conductivity of stainless-steelmaking dust pellets

The thermal conductivity of stainless-steelmaking dust pellets, an important parameter for the direct recycling of the dust, is naturally of interest to metallurgists. The measurement of central temperature and surface temperature was taken in a furnace. The physical model and calculation model for the heating process were set up to check the thermal conductivity of the dust pellets. The physical structure parameters δ and γ of the basic unit are 0.92 and 0.45 based on the calculation. The temperature in the pellet can be expressed in a linear equation α5 Tp =α1TN α2TM α4. This is convenient to determine the central temperature of a pellet in the direct recycling process.

Modeling of thermal conductivity of stainless-steelmaking dust pellets

The thermal conductivity of stainless-steelmaking dust pellets, an important parameter for the direct recycling of the dust, is naturally of interest to metallurgists. The measurement of central temperature and surface temperature was taken in a furnace. The physical model and calculation model for the heating process were set up to check the thermal conductivity of the dust pellets. The physical structure parameters δ and λ of the basic unit are 0.92 and 0.45 based on the calculation. The temperature in the pellet can be expressed in a linear equation a5 Tp =a1 TN a2 TM a4. This is convenient to determine the central temperature of a pellet in the direct recycling process.