首页 | 官方网站   微博 | 高级检索  
     

枫香树材硫酸盐法蒸煮历程
引用本文:熊林根,曹云峰,刘祝兰,杨洋.枫香树材硫酸盐法蒸煮历程[J].纤维素科学与技术,2010,18(4):33-37.
作者姓名:熊林根  曹云峰  刘祝兰  杨洋
作者单位:南京林业大学江苏省制浆造纸重点实验室,江苏南京210037
基金项目:"江苏省青蓝工程中青年学术带头人培养对象"省教育厅资助课题
摘    要:研究了枫香树材硫酸盐法蒸煮过程中木素、戊聚糖和纸浆得率的变化。结果表明,枫香硫酸盐法蒸煮脱木素可分为以下三个阶段:第一阶段,升温到155℃,属于初始脱木素阶段,木素脱除率达到22.5%左右,戊聚糖溶出30.16%,得率为70.48%;第二阶段,从155℃开始到165℃保温60 min,属于大量脱木素阶段,木素脱除率达93.74%,戊聚糖溶出48.31%,得率为47.43%;第三阶段,从165℃保温60 min后到蒸煮末期,属于残余脱木素阶段,木素脱除率达到98%左右,戊聚糖溶出51.04%,得率为43.87%。

关 键 词:枫香树  硫酸盐蒸煮  蒸煮历程  脱木素率

Mechanism of Maple Kraft Pulp
XIONG Lin-gen,CAO Yun-feng,IU Zhu-lan,YANG Yang.Mechanism of Maple Kraft Pulp[J].Journal of Cellulose Science and Technology,2010,18(4):33-37.
Authors:XIONG Lin-gen  CAO Yun-feng  IU Zhu-lan  YANG Yang
Affiliation:(Jiangsu Provincial Key Laboratory of Pulp and Paper Science and Technology,Nanjing 210037,China)
Abstract:By determining the lignin contents including Klason lignin and acid soluble lignin,the yield of pulping,pentosan degradation,and the mechanism of kraft pulping of Maple were studied.This study indicated kraft pulping has three delignification stages: First,the initial delignification stage before 155℃,the rate of delignification reaches to about 22.5%,dissolving pentosan reaches to 30.16%,the yield of pulping is 70.48%;Second,the bulk delignification stage,the rate of delignication reaches to about 93.74%,dissolving pentosan reaches to 48.31%,the yield of pulping is 47.43% in the period from 155℃ to the maximum temperature 165℃ and for another 60 min at the maximum temperature;Third,the residual delignification stage,the rate of delignificaion reaches to about 98%,dissolving pentosan reaches to 51.04%,the yield of pulping is 43.87%.
Keywords:Maple tree  kraft  mechanism of pulping  rate of delignification
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号