首页 | 官方网站   微博 | 高级检索  
     

Q345E钢在模拟海水溶液中的腐蚀行为
引用本文:王婷,宋义全,王鸿,张翰威.Q345E钢在模拟海水溶液中的腐蚀行为[J].包头钢铁学院学报,2013(4):339-343.
作者姓名:王婷  宋义全  王鸿  张翰威
作者单位:内蒙古科技大学材料与冶金学院,内蒙古包头014010
摘    要:采用失重法及电化学方法研究了Q345E钢在模拟海水溶液(3.5%NaCl)中的腐蚀行为.结果表明:Q345E钢自腐蚀电位前期急剧下降,实验后期逐渐趋于稳定;腐蚀初期腐蚀介质充足且发生吸氧腐蚀使Q345E钢的腐蚀速率较大,随着浸泡腐蚀时间的延长及腐蚀产物的附着,腐蚀速率逐渐减小,在腐蚀后期因附着产物脱落而增大.

关 键 词:Q345E钢  海水腐蚀  腐蚀速率

Corrosion behavior of Q345E steel in simulated seawater
WANG Ting,SONG Yi-quan,WANG Hong,ZHANG Han-wei.Corrosion behavior of Q345E steel in simulated seawater[J].Journal of Baotou University of Iron and Steel Technology,2013(4):339-343.
Authors:WANG Ting  SONG Yi-quan  WANG Hong  ZHANG Han-wei
Affiliation:(Materials and Metallurgy School,Inner Mongolia University of Science and Technology, Baotou 014010 ,China)
Abstract:The corrosion behavior of Q345E steel in the simulated seawater (3.5% NaC1) was studied using weight loss method and electrochemical method. The results showed that, the corrosion potential of Q345E steel declined sharply in pre stage and gradually sta- bilized in later stage; the adequate corrosion medium and oxygen-consuming corrosion made corrosion rate of Q345E steel large in the initial period ; with the increase of the immersion corrosion time and the adhesion of the corrosion products, the corrosion rate gradually decreases, but finally increases in post-etching due to the falling of the corrosion products.
Keywords:Q345 E steel  seawater corrosion  corrosion rate
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号