| HL160－WJ－84型水轮机的增容改造技术 |
| |
| 引用本文： | 敏政,唐建波.HL160－WJ－84型水轮机的增容改造技术[J].兰州理工大学学报,1996(1). |
| |
| 作者姓名： | 敏政 唐建波 |
| |
| 作者单位： | 甘肃工业大学水力机械工程系，青海省黄南州水电开发总公司 |
| |
| 摘 要： | 在理论计算基础上，结合转轮实测与实践经验，确定了叶片出水边切割量，铲除了叶片前半部分的鼓包，使ＨＬ１６０－ＷＪ－８４型水力发电机组在６５ｍ额定水头下最大有功功率增加２５％．经调节保证计算，为改造后的机组重选了关机时间Ｔｆ．为解决原机型非接触式密封装置在大负荷工况下主轴漏水喷入水导轴承问题，设计了新型平板橡胶接触式密封装置．
|
| 关 键 词： | 混流式水轮机，叶片，流量，主轴密封，调节保证 |
The reformation technique of HL160-WJ-84 for its power increasement |
| |
| Min Zheng.The reformation technique of HL160-WJ-84 for its power increasement[J].Journal of Lanzhou University of Technology,1996(1). |
| |
| Authors: | Min Zheng |
| |
| Abstract: | Based on the theoretical calculation, practical measurement, and experience,The cut-off amount of trailing edges of the runner blades are determined. The surf actal defection of the blades at its leading part is removed and modified. The output power of the hydroelectrical unit HL160-WJ-84, therefore, is increased by 25 percent. After calculation ofregulating guarantee,a new shutting time T is obtained for the modified hydroelectrical unit. In order to solve the problem of water leakage from the main shaft seal into the guidebearing, a new kind of main shaft seal with rubber plates is designed and used. Its performance is better than that of old non-touching main shaft seal. |
| |
| Keywords: | francis turbine blades flow rate main shaft seal regulating guarantee |
| 本文献已被 CNKI 等数据库收录！ |
