| AlN对Al2O3-C材料性能的影响 |
| |
| 引用本文： | 于建宾,王新福,刘国齐,闫广周.AlN对Al2O3-C材料性能的影响[J].耐火材料,2007,41(6):405-408. |
| |
| 作者姓名： | 于建宾 王新福 刘国齐 闫广周 |
| |
| 作者单位： | 中钢集团洛阳耐火材料研究院,洛阳,471039 |
| |
| 摘 要： | 采用碳热还原法制备的AlN复合粉(主成分是AlN和Al2O3)部分取代Al2O3-C材料中的Al2O3微粉,研究了AlN复合粉加入量(分别为0、15%和25%)对Al2O3-C材料性能的影响。结果表明:(1)试样的显气孔率随AlN复合粉取代量的增加而增大,体积密度、常温抗折强度随AlN复合粉取代量的增加而减小;(2)AlN复合粉的引入能显著提高Al2O3-C材料的高温抗折强度;(3)添加AlN复合粉的试样经熔钢侵蚀后,在材料表面形成较连续的致密层,有利于提高材料的抗熔钢侵蚀性和冲刷性。
|
| 关 键 词： | AlN Al_2O_3-C材料 高温抗折强度 抗侵蚀性 抗冲刷性 |
| 修稿时间： | 2007年4月16日 |
Influence of AlN on property of Al2O3-C material |
| |
| Yu Jianbin,Wang Xinfu,Liu Guoqi,et al Luoyang Institute of Refractories Research,Sinosteel Corporation,Luoyang ,China.Influence of AlN on property of Al2O3-C material[J].Refractories,2007,41(6):405-408. |
| |
| Authors: | Yu Jianbin Wang Xinfu Liu Guoqi Luoyang Institute of Refractories Research Sinosteel Corporation Luoyang China |
| |
| Affiliation: | Yu Jianbin,Wang Xinfu,Liu Guoqi,et al Luoyang Institute of Refractories Research,Sinosteel Corporation,Luoyang 471039,China |
| |
| Abstract: | The influence of AlN composite powder additions (0,15% and 25%) on the properties of Al2O3-C materials was researched with the AlN composite powder (main components are AlN and Al2O3) prepared by carbothermal reduction replacing Al2O3 powder.The result shows that:(1)Apparent porosity of the specimens increases,bulk density and cold modulus of rupture decrease with increasing of the composite AlN powder addition;(2)The hot modulus of rupture of the Al2O3-C specimen is enhanced remarkably after adding AlN powder;(3)The Al2O3-C specimens with AlN powder has enhanced resistances to corrosion and wear of molten steel because of forming continuous dense layer on the surface of the specimens. |
| |
| Keywords: | Aluminum nitride Alumina-graphite material Hot modulus of rupture Corrosion resistance Wear resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
