| 多轴比例加载下镍基合金GH4169试件的弹塑性有限元分析 |
| |
| 引用本文： | 陈建华,尚德广,孙国芹.多轴比例加载下镍基合金GH4169试件的弹塑性有限元分析[J].机械强度,2007,29(4):620-626. |
| |
| 作者姓名： | 陈建华 尚德广 孙国芹 |
| |
| 作者单位： | 北京工业大学,机电学院,北京,100022 |
| |
| 基金项目： | 国家自然科学基金
,
北京市高校拔尖创新人才资助项目 |
| |
| 摘 要： | 对薄壁管进行多轴恒幅比例加载疲劳试验,并运用弹塑性有限元法对该加载条件下的薄壁管进行分析和计算,材料弹塑性特性由von Mises屈服准则和多线性随动硬化准则描述.结果表明,用有限元法计算的试件应力应变值与试验结果吻合.最后,用此方法对缺口件危险点处应力应变状态进行分析.
|
| 关 键 词： | 有限元法 比例加载 缺口件 多轴 比例加载 镍基合金 试件 弹塑性 有限元分析 PROPORTIONAL LOADING SUPERALLOY 应变状态 危险点 缺口件 方法 疲劳试验 应变值 应力 有限元法计算 结果 描述 屈服准则 随动硬化 |
| 修稿时间： | 2005-04-26 |
ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF NICKEL-BASED SUPERALLOY GH4169 UNDER MULTIAXIAL PROPORTIONAL LOADING |
| |
| CHEN JianHua,SHANG DeGuang,SUN GuoQin.ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF NICKEL-BASED SUPERALLOY GH4169 UNDER MULTIAXIAL PROPORTIONAL LOADING[J].Journal of Mechanical Strength,2007,29(4):620-626. |
| |
| Authors: | CHEN JianHua SHANG DeGuang SUN GuoQin |
| |
| Affiliation: | College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China |
| |
| Abstract: | The thin tubular specimens are used to carry out the multiaxial fatigue tests under proportional loading with constant amplitudes.The stress and strain of tubular specimen subjected to proportional loading are analyzed by the elastic-plastic finite element method with von Mises yield criterion and multilinear kinematic hardening rule.The results showed that the calculated stress-strain values by FEM(finite element method) have good agreement with the experimental results.Finally the stress-strain state of the critical position for notched specimen is analyzed and calculated by the proposed finite element model. |
| |
| Keywords: | Finite element method Proportional loading Notched specimen |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
