小径微孔聚氨酯人工血管的顺应性

由激光测微器、压力传感器、A／D卡、微电脑和循环回路等组成的装置测定了小径人工血管的径向顺应性，由微注射器、压力传感器等组成的装置测定了体积顺应性，轴向顺应性由体积顺应性和径向顺应性计算出。体积顺应性，径向顺应性和轴向顺应性都随血管材料弹性的增大、盐／胶比的增加（孔隙率）和浸渍层数（血管壁厚度）的减小而增大。PU血管的外周模量与径向模量分别由径向顺应性。轴向顺应性计算，外周模量与径向模量之比值接近1，即两模量大小与变形方向无关。外周模量与径向模量随血管材料弹性和盐／胶比增加而变小。但管壁厚度对其的影响不大。通过合理选择更具弹性的PU材料（Chro佳，PCU1500次之），最佳盐／胶比例（6：1）以及控制浸渍层数（4～6层），可以制备出顺应性接近天然血管的小径人工血管。

Compliance of Small Diameter Polyurethane Artificial Vascular Graft

The radical compliance of small diameter artificial vascular grafts was measured by a device made of laser micrometer, pressure transducer, A/D card, micro computer and pulsed circulation loop, the volumetric compliance was measured by a device made of micro-syringe and pressure transducer; the longitudinal compliance was calculated from volumetric compliance and radical compliance. The research results showed that the radical compliance, volumetric compliance and longitudinal compliance would rise not only with the increase in polyurethane (PU) elasticity and salt/polymer ratio (or porosity), but also with the decrease in dipping layers (or wall thickness). Circumferential moduli E zeta and longitudinal moduli E theta could be calculated from volumetric compliance and longitudinal compliance respectively; E theta and E zeta would decrease with the increase in PU elasticity and salt/polymer ratio, but was independent on number of dipping layers. Small diameter PU artificial vascular grafts with compliance close to natural vein or artery can be prepared by choosing of more elastic PU materials (Chro or PCU1500), optimization of salt/polymer ratio (6:1), and the number of dipping layers (4-6 layers).