| 超窄脉冲微细电解铣削加工机理和成型预测建模 |
| |
| 引用本文： | 李小海,刘武奇,孙赵宁,王新荣,丁海娟,张霞,王晓霞.超窄脉冲微细电解铣削加工机理和成型预测建模[J].佳木斯工学院学报,2014(6):898-900. |
| |
| 作者姓名： | 李小海 刘武奇 孙赵宁 王新荣 丁海娟 张霞 王晓霞 |
| |
| 作者单位： | 佳木斯大学机械工程学院,黑龙江佳木斯154007 |
| |
| 基金项目： | 黑龙江省自然科学基金项目（E201133）;国家自然科学基金（51375208）. |
| |
| 摘 要： | 采用超窄脉冲电源，利用简单圆柱工具电极在数控系统控制下，实现三维微细电解铣削加工。本文探索了低浓度NaClO3溶液、超窄脉冲的微细电解铣削加工机理，进行微细电解铣削加工成型预测建模，并进行基于超窄脉冲微细电解铣削加工试验。
|
| 关 键 词： | 超窄脉冲电源 微细加工 电解加工 铣削 |
Mechanism of Electrochemical Micro-Milling and Shaped Predictive Modeling Based on Ultra-short Pulse |
| |
| Authors: | LI Xiao-hai LIU Wu-qi SUN Zhao-ning WANG Xin-rong DING Hai-juan ZHANG Xia WANG Xiao-xia |
| |
| Affiliation: | (College of Mechanical Engineering, Jiamusi University, Jiamusi 154007, China) |
| |
| Abstract: | By using ultra-short pulse power supply , a simple tool electrode was controlled by CNC sys-tem to mill 3D microstructure.The mechanism of electrochemical micro -milling under lower concentration of passivity electrolyte NaClO 3 was discussed .The shaped predictive modeling of electrochemical micro -milling was done , and the experiment of electrochemical micro -milling based on ultra-short pulse was carried out . |
| |
| Keywords: | ultra- short pulse power supply micromachining electrochemical machining milling |
| 本文献已被 维普 等数据库收录！ |
