| 偶联剂改性UHMWPE纤维表面性能的研究 |
| |
| 引用本文： | 张一,于俊荣,黄献聪,胡祖明.偶联剂改性UHMWPE纤维表面性能的研究[J].合成纤维工业,2009,32(1). |
| |
| 作者姓名： | 张一 于俊荣 黄献聪 胡祖明 |
| |
| 作者单位： | 1. 东华大学纤维材料改性国家重点实验室,上海,201620
2. 解放军总后勤部军需装备研究所,北京,100088 |
| |
| 基金项目： | 高等学校学科创新引智计划 |
| |
| 摘 要： | 选用硅烷偶联剂KH-550,KH-560和钛酸酯偶联剂NDZ-201作为表面改性剂,对超高相对分子质量聚乙烯(UHMWPE)冻胶纤维在萃取阶段进行表面处理,经干燥、超拉伸制得表面改性UHMWPE纤维。采用红外光谱仪、接触角测量仪测定了纤维的表面化学结构和表面润湿性能,采用单纤维树脂包埋-拔出法测定了纤维与树脂基体的界面剪切强度,比较了改性前后纤维的力学性能变化。结果表明:改性后纤维表面引入了极性基团,硅烷偶联剂KH-550对UHMWPE纤维的表面改性效果最好。采用质量分数为1%的硅烷偶联剂KH-550溶液处理后,纤维与环氧树脂间的界面剪切强度提高了87.8%,纤维的断裂强度和模量分别提高了6.9%和32.6%。
|
| 关 键 词： | 超高相对分子质量聚乙烯纤维 偶联剂 表面改性 力学性能 |
Study on surface properties of UHMWPE fiber modified with coupling agent |
| |
| Zhang Yi,Yu Junrong,Huang Xiancong,Hu Zuming.Study on surface properties of UHMWPE fiber modified with coupling agent[J].China Synthetic Fiber Industry,2009,32(1). |
| |
| Authors: | Zhang Yi Yu Junrong Huang Xiancong Hu Zuming |
| |
| Affiliation: | 1. State Key Laboratory for Modification of Chemical Fibers and Polymer Materials;Donghua University;Shanghai 201620;2. The Quartemaster Equipment Institute of The General Logistics Department of CPLA;Beijing 100088 |
| |
| Abstract: | Using silane coupling agent KH-550, KH-560 and titanate coupling agent NDZ-201 as surface modifiers, the ultrahigh relative molecular weight mass polyethylene (UHMWPE) gel fiber was modified during the extraction process and produced into surface-modified UHMWPE fiber after drying and ultra-drawing. The surface chemical structure and wettability of the obtained fiber were measured with infrared spectrometer and contact angle tester. The interfacial shear strength of the fiber with resin matrix was measured ... |
| |
| Keywords: | ultrahigh relative molecular weight mass polyethylene fiber coupling agent surface modification mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
