| 深孔单刃刚性铰刀工艺试验研究 |
| |
| 引用本文： | 沈兴全,孟庆义,李耀明.深孔单刃刚性铰刀工艺试验研究[J].中北大学学报,2012(2):107-110,125. |
| |
| 作者姓名： | 沈兴全 孟庆义 李耀明 |
| |
| 作者单位： | 中北大学山西省深孔加工工程技术研究中心;北京卫星制造厂 |
| |
| 基金项目： | 国家自然科学基金资助项目(51175482/E050901) |
| |
| 摘 要： | 单刃刚性铰加工具有高速切削、自动导向、加工表面粗糙度低等一系列优点,本文利用弹、塑性理论,研究了作用于导向块的力对孔壁的挤压效果,提出了单刃刚性铰刀铰削加工的两种不同工作状态,分析了铰削加工处于挤压状态的条件.经试验分析,得出为了获得良好的孔加工表面质量,必须使铰削加工处于挤压工作状态,确定了切削参数对切削力及表面粗糙度的影响.
|
| 关 键 词： | 深孔 单刃刚性铰刀 工艺 试验 |
Deep Test Technology of Single-Edge Rigid Reamer for Deep Hole Processing |
| |
| SHEN Xing-quan,MENG Qing-yi,LI Yao-ming.Deep Test Technology of Single-Edge Rigid Reamer for Deep Hole Processing[J].Journal of North University of China,2012(2):107-110,125. |
| |
| Authors: | SHEN Xing-quan MENG Qing-yi LI Yao-ming |
| |
| Affiliation: | 1(1.Shanxi Deep-Hole Cutting Research Center of Engineering Technology,North University of China,Taiyuan 030051,China;2.Beijing Satelite Manufacturing Factory,Beijing 100190,China) |
| |
| Abstract: | Single-edge high-speed cutting rigid hinge processing is auto-oriented and of low surface roughness.The elastic and plastic theories were employed to study the force acting on the guide block and the compression effect on the pore wall.The single rigid blade reamer works at two different states.The extrusion conditions of the reamer was analyzed.It was concluded that in order to obtain good surface quality,the ream must be processed in extrusion reaming state.The corresponding cutting parameters,cutting force and surface roughness were determined. |
| |
| Keywords: | deep hole single-blade rigid reamers process test |
| 本文献已被 CNKI 等数据库收录！ |
|
