| 工艺因素对PCM法制备泡沫铝孔结构的影响 |
| |
| 引用本文： | 艾金强,王芳,武建国,张树玲,游晓红,王录才.工艺因素对PCM法制备泡沫铝孔结构的影响[J].铸造,2012,61(8):933-936. |
| |
| 作者姓名： | 艾金强 王芳 武建国 张树玲 游晓红 王录才 |
| |
| 作者单位： | 太原科技大学材料科学与工程学院,山西太原,030024 |
| |
| 基金项目： | 山西省回国留学人员科研资助项目，国家人事部留学人员科技活动择优支持项目，太原科技大学博士启动基金 |
| |
| 摘 要： | 介绍了Al粉球磨时间、Mg粉添加量、TiH2的氧化时间三个工艺因素的交互作用对PCM法制备泡沫铝孔结构的影响。得出影响试验结果的首要因素是TiH2的氧化时间,其次是Al粉球磨时间、Mg粉添加量。当TiH2的氧化时间为10 min、Al粉球磨时间为85min、Mg粉添加量为0.5%时,得到的泡沫铝试样孔隙率为84.2%,平均当量圆直径为1.901 mm,平均圆形度为0.754。
|
| 关 键 词： | 泡沫铝 PCM法 工艺参数 孔结构 |
Influence of Technological Factors on Pore Structure of Aluminum Foams Prepared by PCM Method |
| |
| AI Jin-qiang
,
WANG Fang
,
WU Jian-guo
,
ZHANG Shu-ling
,
YOU Xiao-hong
,
WANG Lu-cai.Influence of Technological Factors on Pore Structure of Aluminum Foams Prepared by PCM Method[J].Foundry,2012,61(8):933-936. |
| |
| Authors: | AI Jin-qiang WANG Fang WU Jian-guo ZHANG Shu-ling YOU Xiao-hong WANG Lu-cai |
| |
| Affiliation: | (School of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,Shanxi,China) |
| |
| Abstract: | The influence of interaction of three process factors including the Al powder milling time,Mg powder addition,TiH2 oxidation time on aluminum foams pore structure prepared by PCM method was introduced.The chief factor affecting the experimental results is the oxidation time of TiH2,the second is Al powder milling time,Mg powder addition.When the oxidation time of TiH2was 10 min,Al powder milling time was 85 min,Mg powder addition was 0.5%,the porosity of the aluminum foams sample was 84.2%,the average equivalent circle diameter was 1.901 mm,and the average circularity was 0.754. |
| |
| Keywords: | aluminum foams PCM method process parameter pore structure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
