| 钛合金铣削仿真分析及实验研究 |
| |
| 引用本文： | 许业林,朱春临,张冲,许春停.钛合金铣削仿真分析及实验研究[J].电子机械工程,2012,28(4):53-55，59. |
| |
| 作者姓名： | 许业林 朱春临 张冲 许春停 |
| |
| 作者单位： | 中国电子科技集团公司第三十八研究所,安徽合肥,230088 |
| |
| 摘 要： | 由于良好的综合性能,钛合金被广泛应用,但钛合金加工性能差,刀具易磨损。为了提高钛合金铣削刀具寿命,设计正交实验,运用AdvantEdge FEM软件对TA15钛合金进行了三维铣削仿真,分析了切削温度与铣削参数之间的关系。基于铣削参数-温度图,并结合切屑云图,给出了优化后的铣削参数。铣削实验表明,仿真分析可以优化铣削参数...
|
| 关 键 词： | 钛合金 正交实验 铣削参数 仿真 |
Simulation Analysis and Experimental Study on Milling of Titanium Alloy |
| |
| XU Ye-lin,ZHU Chun-lin,ZHANG Chong and XU Chun-ting.Simulation Analysis and Experimental Study on Milling of Titanium Alloy[J].Electro-Mechanical Engineering,2012,28(4):53-55，59. |
| |
| Authors: | XU Ye-lin ZHU Chun-lin ZHANG Chong and XU Chun-ting |
| |
| Affiliation: | (The 38th Research Institute of CETC,Hefei 230088,China) |
| |
| Abstract: | Titanium alloy is widely used for its good overall properties.But cutting performance of titanium alloy is low,and cutting tool is easily worn.In order to improve the life time of cutting tool,the orthogonal experiment is designed.The 3D milling simulation of titanium alloy TA15 is performed with AdvantEdge FEM software.The relationship between cutting temperature and milling parameters is analyzed.The optimized milling parameters are given based on the milling parameters-temperature graph and the chip breakage contour.Milling experiment shows that simulation analysis can optimize milling parameters and improve the life time of cutting tool. |
| |
| Keywords: | titanium alloy orthogonal experiment milling parameters simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《电子机械工程》浏览原始摘要信息 |
|
点击此处可从《电子机械工程》下载全文 |
|
