| Abstract: | In order to study the relationship between water composition and stream flow rate, it is desirable to sample at a frequency related to flow rate, especially during storm events. In a rural catchment of 18 ha near Oxford, the rate of rainfall was found to be linearly related to discharge on the rising limb of the stream hydrograph. A sampling system was therefore designed in which electrical pulses from a tipping-bucket raingauge were used to initiate and control the action of an automatic water sampler. A threshold rainfall intensity is set above which sampling commences. Sampling then continues at regular increments of rainfall until the intensity drops below the threshold, after which sampling occurs at regular intervals during the period that the stream flow reverts to normal. The CMOS electrical circuits which control the sampling also operate a cassette tape recorder which records the time of each tip of the raingauge and operation of the sampler. Since the sytem is designed to impose very little additional load on the battery which powers the water sampler, and can operate unattended for at least a fortnight, it is ideal for use in small, remote catchments. The system has been extended to include measurements of water temperature and could provide other measurements as well. |
