首页 | 官方网站   微博 | 高级检索  
     

红外无损检测在面向等离子体部件检测的应用
引用本文:刘文勇,刘雷雷,佟立丽,曹学武.红外无损检测在面向等离子体部件检测的应用[J].核聚变与等离子体物理,2015,35(2):187-192.
作者姓名:刘文勇  刘雷雷  佟立丽  曹学武
作者单位:(上海交通大学机械与动力工程学院,上海 200240)
基金项目:国家磁约束核聚变能发展研究专项(2013GB114005)
摘    要:建立了主动式内热源激励的红外无损检测平台,并进行了不同缺陷大小的EAST W/Cu 面向等离子体部件(PFC)的无损检测实验(NDT),得到试件表面的红外热图。通过最大温差值融合法消除由试件表面发射率不均匀引起的温度误差,通过快速离散傅里叶变换法提高了图像的信噪比,实现了对W/Cu 面向等离子体部件缺陷的分辨。通过数值模拟的手段对可能影响该检测技术的关键因素进行了定量分析。

关 键 词:钨铜面向等离子体部件  红外热像法  图像处理  数值模拟  

Application of infrared nondestructive inspection methods to PFCs
LIU Wen-yong,LIU Lei-lei,TONG Li-li,CAO Xue-wu.Application of infrared nondestructive inspection methods to PFCs[J].Nuclear Fusion and Plasma Physics,2015,35(2):187-192.
Authors:LIU Wen-yong  LIU Lei-lei  TONG Li-li  CAO Xue-wu
Affiliation:(School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240)
Abstract:Active infrared thermography test facility was established, non destruction testing (NDT) experiments of EAST W/Cu PFC with different artificial defects size are conducted and infrared thermography imaging is obtained. Surface temperature error of the specimens caused by emissivity can be eliminated by maximum temperature difference reconstruction method, and fast discrete Fourier transform method can increase the ratio of signal to noise and realize defects distinguish. The key factors that may affect this infrared NDT method are discussed by mean of numerical simulation.
Keywords:W/Cu PFCs  IR thermograph  Thermograph processing  Numerical simulation  
本文献已被 CNKI 等数据库收录!
点击此处可从《核聚变与等离子体物理》浏览原始摘要信息
点击此处可从《核聚变与等离子体物理》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号