首页 | 官方网站   微博 | 高级检索  
     

测绘相机坐标系与立方镜转换矩阵的标定
引用本文:吴国栋,宋丹.测绘相机坐标系与立方镜转换矩阵的标定[J].光学精密工程,2007,15(11):1727-1730.
作者姓名:吴国栋  宋丹
作者单位:1. 中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033
2. 中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033;中国科学院,研究生院,北京,100039
摘    要:介绍了一种测绘相机坐标系与立方镜之间关系的标定方法。对两坐标系的转换矩阵、标定方法和标定精度进行研究。推导了两坐标系的关系,建立了坐标系间的转换矩阵。利用高精度二维转台、0.5″经纬仪和平行光管完成了测绘相机与相机立方镜坐标系之间的角度测量。最后,对标定精度进行了分析。误差分析结果表明:该方法的标定精度优于2″(1σ),可以满足测绘相机坐标系与立方镜转换关系的标定要求,具有实用价值。

关 键 词:测绘相机  立方镜  转换矩阵  标定
文章编号:1004-924X(2007)11-1727-04
收稿时间:2007-07-18
修稿时间:2007-07-18

Calibration of mapping camera and cubic prism coordinate system
WU Guo-dong,SONG Dan.Calibration of mapping camera and cubic prism coordinate system[J].Optics and Precision Engineering,2007,15(11):1727-1730.
Authors:WU Guo-dong  SONG Dan
Affiliation:1. Changchun Institute of 0ptics, Fine Mechanics and Physics, Chinese Academy of Sciences, Chang chun 130033,China;2. Graduate School of the Chinese Academy of Sciences, Beijing 100039, China
Abstract:A method for calibrating mapping camera and cubic prism coordinate system was introduced. The transformation matrix, calibration method and precision of the coordinate system were investigated. The relation of coordinate system was calculated, and the transformation matrix for coordinate system was established.Then, the angles between the mapping camera and the cubic prism coordinate system were tested by combining of high-accuracy 2D turntable, 0.5″ theodolite and autocollimation telescope. Finally, the calibration precision was analyzed. The error analysis indicates that the precision is smaller than 2″(1σ),which shows that the method can meet the requirements of calibrating mapping camera and cubic prism coordinate system and is valuable for practical application.
Keywords:mapping camera  cubic prism  transformation matrix  calibration
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《光学精密工程》浏览原始摘要信息
点击此处可从《光学精密工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号