首页 | 官方网站   微博 | 高级检索  
     

高氮馏分油加氢精制催化剂的研制
引用本文:石芳,杨建国,刘红光,张国辉,于海斌,李佳,赵训志,张玉婷.高氮馏分油加氢精制催化剂的研制[J].精细石油化工,2011,28(6):44-48.
作者姓名:石芳  杨建国  刘红光  张国辉  于海斌  李佳  赵训志  张玉婷
作者单位:1. 中海油天津化工研究设计院,天津,300130
2. 中海油天津化工研究设计院,天津300130;河北工业大学化工学院,天津300130
3. 河北工业大学化工学院,天津,300130
摘    要:以含SiO2和/或TiO2的γ-A12O3为复合载体、以W-Mo-Ni为活性金属组分,采用分步等体积浸渍法制备了一系列三叶草形加氢精制催化剂.采用X荧光射线、N2吸附比表面积、X射线衍射、扫描电镜等对催化剂结构进行了表征.在反应压力8.0 MPa、反应温度340℃、氢油体积比600∶1、体积空速1.5h-1条件下,测定...

关 键 词:脱硫  脱氮  加氢  催化剂  复合氧化物载体

DEVELOPMENT OF HYDROREFINING CATALYST FOR DISTILLATE FUEL OIL WITH HIGH NITROGEN CONTENT
Shi Fang,Yang Jianguo,Liu Hongguang,Zhang Guohui,Yu Haibin,Li Jia,Zhao Xunzhi,Zhang Yuting.DEVELOPMENT OF HYDROREFINING CATALYST FOR DISTILLATE FUEL OIL WITH HIGH NITROGEN CONTENT[J].Speciality Petrochemicals,2011,28(6):44-48.
Authors:Shi Fang  Yang Jianguo  Liu Hongguang  Zhang Guohui  Yu Haibin  Li Jia  Zhao Xunzhi  Zhang Yuting
Abstract:A series of novel hydrorefining catalysts of clover shape were prepared by an equivalent volume impregnation method of multi steps,using γ-Al2O3 containing SiO2 and/or TiO2 as composite oxide carrier and W-Mo-Ni as active metal components.The structure of the catalysts was characterized by means of XRF,BET,XRD,NH3-TPD,and their mechanical strength was measured.Evaluation of process conditions are as follows: reaction pressure 8 MPa,reaction temperature 340 ℃,hydrogen to oil volume ratio of 600∶1,volume space velocity of 1.5 h-1 with a hydrogenation unit in 100 mL fixed-bed reactor.The experiment results showed that the catalysts have the excellent catalytic performance of hydrodesulphurization(HDS),hydrodenitrogenation(HDN) and the olefin hydrogenation(HYD) for the inferior distillate fuel oil with high nitrogen content,with W-Mo-Ni/SiO2-TiO2-Al2O3 catalyst 98% HDS,97% HDN and 98% HYD were achieved.
Keywords:hydrodesulphurization  hydrodenitrogenation  hydrogenation  catalyst  composite oxide carrier
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号