| 磷钨杂多酸插层Ni2+-Mg2+-Al3+-LDHs复合材料的合成 |
| |
| 引用本文： | 马向荣,刘洁莹.磷钨杂多酸插层Ni2+-Mg2+-Al3+-LDHs复合材料的合成[J].工业催化,2013,21(9):43-45. |
| |
| 作者姓名： | 马向荣 刘洁莹 |
| |
| 作者单位： | 榆林学院化学与化工学院，陕西 榆林 719000 |
| |
| 基金项目： | 陕西省教育厅资助项目，榆林学院高层次人才资助项目 |
| |
| 摘 要： | 利用尿素回流法合成Ni2+-Mg2+-Al3+-LDHs，Ni2+-Mg2+-Al3+-LDHs层状材料经300 ℃焙烧后，以焙烧产物作为前驱体，通过焙烧重组法将磷钨杂多酸成功引入Ni2+-Mg2+-Al3+-LDHs层中，制备磷钨杂多酸插层Ni2+-Mg2+-Al3+-LDHs复合材料。
|
| 关 键 词： | 催化化学 Ni2+-Mg2+-Al3+-LDHs 杂多酸 焙烧重组 |
Preparation of phosphotungstic heteropoly acid pillared Ni2+-Mg2+-Al3+-LDHs |
| |
| MA Xiangrong
,
LIU Jieying.Preparation of phosphotungstic heteropoly acid pillared Ni2+-Mg2+-Al3+-LDHs[J].Industrial Catalysis,2013,21(9):43-45. |
| |
| Authors: | MA Xiangrong LIU Jieying |
| |
| Affiliation: | School of Chemistry and Chemical Engineering, Yulin University, Yulin 719000, Shaanxi, China |
| |
| Abstract: | Ni2+-Mg2+-Al3+-LDHs was prepared by urea reflux method and was calcinaed at 300 ℃. UsingNi2+-Mg2+-Al3+-LDHs calcined at 300 ℃ as the precursor,phosphotungstic heteropoly acid pillaredNi2+-Mg2+-Al3+-LDHs was obtained by the calcined recombination method. |
| |
| Keywords: | catalytic chemistry Ni2+-Mg2+-Al3+-LDHs heteropolyacid calcined recombination |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《工业催化》浏览原始摘要信息 |
|
点击此处可从《工业催化》下载全文 |
