| 自由曲面的多级定位方法 |
| |
| 引用本文： | 徐毅,李建刚,李泽湘.自由曲面的多级定位方法[J].哈尔滨工业大学学报,2009(11):106-108. |
| |
| 作者姓名： | 徐毅 李建刚 李泽湘 |
| |
| 作者单位： | 哈尔滨工业大学深圳研究生院;香港科技大学 |
| |
| 基金项目： | 国家自然科学基金资助项目(50705024);广东省自然科学基金资助项目(07300029) |
| |
| 摘 要： | 为解决自由曲面工件定位中无法正确求取对应点问题,运用分级两步定位方法进行定位,达到正确求解的目的.首先在工件曲面和CAD曲面上分别均匀取点,提取曲面上的特征曲面,获得特征匹配关系,然后算出对应的位姿关系,完成预定位、精定位.为节省计算时间,提出了基于最大特征值优化的采点方法.最后给出实例研究,验证了方法的正确性.
|
| 关 键 词： | 自由曲面 分级两步 特征值 工件定位 |
Multi-level localization method for free-form surface |
| |
| XU Yi,LI Jian-gang,LI Ze-xiang.Multi-level localization method for free-form surface[J].Journal of Harbin Institute of Technology,2009(11):106-108. |
| |
| Authors: | XU Yi LI Jian-gang LI Ze-xiang |
| |
| Affiliation: | 1. Shenzhen Graduate School,Harbin Institute of Technology,Shenzhen 518055,China; 2. Hong Kong University of Science and Technology,Hong Kong) |
| |
| Abstract: | Aimed at the difficulty in getting the corresponding points in free-form surface localization of workpiece,a two-level localization method is presented. Firstly,some points distributed uniformly on workpiece surface and CAD surface are selected. Then the features are extracted and pairs of corresponding features are matched. The transformation is computed to achieve the pre-positioning and the accurate positioning. In this process,a probing strategy based on the optimization of the maximum eigenvalue is proposed to reduce the computing time. Results of a case study prove the validity of the presented method. |
| |
| Keywords: | free-form surface two levels eigenvalue workpiece localization |
| 本文献已被 CNKI 等数据库收录！ |
|
