Optical and electrical properties of Al doped ZnO thin film with preferred orientation in situ grown at room temperature

To optimize the process and obtain highly conducting and transparent Aluminum-doped zinc oxide (AZO) thin films, AZO films were deposited on glass substrates at room temperature by Radio-frequency (RF) magnetron sputtering with various Argon flow rates. The influences of Argon flow rate on structure, morphology, optical, electrical and photoluminescence properties of AZO films were investigated by varying the Argon flow rate from 36 to 68 sccm. The best quality AZO film with resistivity 1.39 × 10^?3 Ω cm, sheet resistance 8.2 Ω/sq and 84.2% average visible transmittance was prepared at 44 sccm for 30 min. Also, the self-heating effect of target was investigated by preparing AZO films for 10 min and 20 min at 44 sccm, 180 W and 1.0 Pa. The influence of increasing structural quality actually affected by Argon flow rate was more prominent on carrier concentration than mobility. The schematic illustration of microstructural evolution was proposed. The average growth rate of around 60 nm/min demonstrated the self-heating effect of target was weak and could be ignored.