首页 | 官方网站   微博 | 高级检索  
     

无溶剂型双组分EP改性PU胶粘剂的研制
引用本文:韩建祥,胡孝勇,袁晓玲,陈锦凡.无溶剂型双组分EP改性PU胶粘剂的研制[J].中国胶粘剂,2012(2):9-12.
作者姓名:韩建祥  胡孝勇  袁晓玲  陈锦凡
作者单位:广西工学院生物与化学工程系;江门亿源生化工程有限公司
摘    要:以聚醚二元醇、改性MDI(4,4′-二苯基甲烷二异氰酸酯)及PAPI(多亚甲基多苯基多异氰酸酯)为主要原料,合成了PU(聚氨酯)预聚体;然后以EP(环氧树脂)作为PU预聚体的改性剂,制备出一种软包装用无溶剂型双组分EP改性PU胶粘剂。研究结果表明:该胶粘剂的Tg(玻璃化转变温度)为-17.9℃;当m(EP)∶m(-NCO)=(0.99~1.04)∶1时,主剂黏度适中,EP改性PU胶粘剂具有良好的综合性能。

关 键 词:环氧树脂  改性  聚氨酯  胶粘剂  双组分  无溶剂

Study on preparing solvent-free two-components PU adhesives modified by EP
Han Jianxiang,Hu Xiaoyong,Yuan Xiaoling,Chen Jinfan.Study on preparing solvent-free two-components PU adhesives modified by EP[J].China Adhesives,2012(2):9-12.
Authors:Han Jianxiang  Hu Xiaoyong  Yuan Xiaoling  Chen Jinfan
Affiliation:1.Department of Biological and Chemical Engineering,Guangxi University of Technology,Liuzhou 545006,China; 2.Jiangmen Yiyuan Biochemical Engineering Co.,Ltd.,Jiangmen 529000,China)
Abstract:With polyether diol,modified MDI(4,4′-diphenyl methane diisocyanate) and PAPI(multimethylene multiphenyl multiisocyanate) as main raw materials,a PU(polyurethane) prepolymer was prepared.Then a solvent-free two-components PU adhesive modified by EP for flexible packaging was made with EP(epoxy resin) as modifier of PU prepolymer.The research results showed that the Tg(glass transition temperature) of adhesive was-17.9 ℃.When mass ratio of m(EP)∶m(-NCO) was(0.99-1.04)∶1,the main agent viscosity was moderate,and the PU adhesive modified by EP had good combination property.
Keywords:epoxy resin  modified  polyurethane  adhesive  two-components  solvent-free
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号