首页 | 官方网站   微博 | 高级检索  
     

热氧化温度对非平衡磁控溅射TiN镀层的影响
引用本文:梁戈,白力静,蒋百灵.热氧化温度对非平衡磁控溅射TiN镀层的影响[J].兵器材料科学与工程,2009,32(4).
作者姓名:梁戈  白力静  蒋百灵
作者单位:西安理工大学,材料科学与工程学院,陕西,西安,710048
基金项目:国家“863”科技攻关项目(2005AA33H010);;西安理工大大学科研基金项目(101-210603)
摘    要:通过SEM和XRD法,研究不同热氧化温度下闭合场非平衡磁控溅射离子镀技术制备的TiN镀层形貌、相结构及性能的变化。结果表明:非平衡磁控溅射离子镀TiN镀层在700℃以下性能基本稳定,具有良好的热氧化性能,尽管600℃时生成少量TiO2相,但600℃之前断口形貌及组织结构保持稳定;700℃时镀层的单位质量氧化增重率迅速增加,氧化曲线出现拐点,镀层失效。

关 键 词:TiN镀层  热氧化  非平衡磁控溅射

Influence of oxidation temperature on microstructure and properties of unbalanced magnetron sputtered TiN coatings
LIANG Ge,BAI Lijing,JIANG Bailing.Influence of oxidation temperature on microstructure and properties of unbalanced magnetron sputtered TiN coatings[J].Ordnance Material Science and Engineering,2009,32(4).
Authors:LIANG Ge  BAI Lijing  JIANG Bailing
Abstract:The effects of oxidation temperature on the morphology, microstructure and phases of TiN coatings deposited by closed field unbalanced magnetron sputter ion plating (CFUBMSIP) were studied by SEM and XRD. The results show that properties of TiN coatings deposited by CFUBMSIP are stable below 700℃ , which exhibit excellent thermal oxidation properties. The cross-sectional morphology and structure are stable when coating treated at 600℃ , despite the presence of small amount of TiO_2. Due to the dramatically increase of weight gain for coatings, the oxidation curve shows an inflexion at 700 ℃,and the coating fails at this temperature.
Keywords:TiN coatings  thermal oxidization  unbalanced magnetron sputtering  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号