闭式地表水源热泵水体热承载能力研究

针对闭式湖水源热泵，以上海市东方绿舟湖水水体为研究对象，采用计算流体力学（CFD）方法对湖水源热泵系统湖水换热端进行了三维模拟，并用实验数据对模拟的正确性进行了验证。模拟结果表明：对上海地区，在水深为4m的水体中，冬季工况中湖水源热泵单个盘管吸热量不大于2700W才能保证水体周平均最大温降≤2℃，夏季工况中湖水源热泵单个盘管放热量不大于2500W才能保证水体周平均最大温升≤1℃。当盘管换热量为1600W时，冬季工况下盘管距湖底距离不大于1．8m，夏季工况下盘管距湖底的距离不大于1．6m时才能满足《地表水环境质量标准》中规定的水体热承载力规定，不会对受纳水体环境造成热污染。

Research on the Heat Transfer Load Capacity of the Water Zone for Closed-Loop Lake-Water Source Heat Pump Systems

The heat exchange between the closed-loop surface water resource heat pump and the received water was simulated with 3-D Computational Fluid Dynamics(CFD) method.The simulation results agreed well with the experimental results.The results showed that: in Shanghai when the height of the received water was 4 m,the heat exchange capacity of one single coil should be less than 2700 W to make sure that the drop the water temperature is less than 2℃ in winter condition,meanwhile,the heat exchange capacity of one single coil should be less than 2500 W to make sure that the drop the water temperature is less than 1℃ in summer condition.To meet the requirements of "Environmental Quality Standards for Surface Water" thus avoiding heat pollution of the received water,when the heat exchange capacity was 1600 W for one single coil,the height of the coil should be less than 1.8 m away from the lakebed in the winter condition and the height of the coil should be less than 1.6 m away from the lakebed in summer condition.