| 6700 转向直臂成形过程设计及微观组织预测 |
| |
| 引用本文： | 马勇,赵亚培,陈文琳,喻建军,沙奔,董潇,吴玉程.6700 转向直臂成形过程设计及微观组织预测[J].精密成形工程,2013,5(4):11-15,39. |
| |
| 作者姓名： | 马勇 赵亚培 陈文琳 喻建军 沙奔 董潇 吴玉程 |
| |
| 作者单位： | 合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学材料科学与工程博士后流动站, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009 |
| |
| 基金项目： | 2011 教育部科学技术研究重大项目(311025) |
| |
| 摘 要： | 通过对锻件结构的分析,设计了辊锻制坯+终锻的生产工艺。 运用有限元分析技术,通过对比分析,重点研究了新过程终锻成形时金属流动情况、等效应力应变分布,并对锻件的晶粒度进行了预测。 通过对锻件成形、载荷及质量等的综合评定表明,新的生产工艺在改善锻件质量、提高材料利用率与模具寿命等方面具有明显优势。
|
| 关 键 词： | 6700 转向节臂 辊锻 数值模拟 微观组织 |
| 收稿时间： | 2012/11/5 0:00:00 |
| 修稿时间： | 6/1/2013 12:00:00 AM |
Forming Process Design and Microstructure Prediction of 6700 Steering Arm |
| |
| MA Yong,ZHAO Ya-pe,CHEN Wen-lin,YU Jian-jun,SHA Ben,DONG Xiao and WU Yu-cheng.Forming Process Design and Microstructure Prediction of 6700 Steering Arm[J].Journal of Netshape Forming Engineering,2013,5(4):11-15,39. |
| |
| Authors: | MA Yong ZHAO Ya-pe CHEN Wen-lin YU Jian-jun SHA Ben DONG Xiao and WU Yu-cheng |
| |
| Affiliation: | School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;Materials Science and Engineering Mobile Post-doctoral Stations, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | Roll forging billet and then finish forging were designed as a new process of production based on the analysis of the structure of forgings. The finite element analysis techniques were used to research on the metal flow, stress and strain distribution and grain size prediction in the new process. The results show that the new process of production has obvious advantages in improving the quality of forgings, material utilization and die life through comprehensive assessment of forming, load and quality. |
| |
| Keywords: | 6700 steering arm roll forging numerical simulation microstructure |
|
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
