| 细长轴车削加工误差的分析 |
| |
| 引用本文： | 王红.细长轴车削加工误差的分析[J].机械研究与应用,2006,19(5):31-32. |
| |
| 作者姓名： | 王红 |
| |
| 作者单位： | 桂林电子科技大学,广西桂林 541004 |
| |
| 摘 要： | 针对细长轴的车削加工。分别对在一端卡盘夹紧、一端顶尖支承及两端顶尖支承的装夹条件下车削加工时的变形进行力学分析。建立在切削力作用下产生弯曲变形的解析模型。算侧表明：逆向车削时轴的弯曲变形以及加工误差远小于同等条件下正向车削的变形和误差。
|
| 关 键 词： | 车削 细长轴 误差分析 力学模型 |
| 文章编号： | 1007-4414(2006)05-0031-02 |
| 修稿时间： | 2006年7月4日 |
The analysis of machining error on slender shafts |
| |
| Wang Hong.The analysis of machining error on slender shafts[J].Mechanical Research & Application,2006,19(5):31-32. |
| |
| Authors: | Wang Hong |
| |
| Abstract: | Mechanical analysis is carried out to the deformation of workpiece when turning slender shafts under two different conditions of clamping.Analytical models are set up for the bending deformation resulting from cutting force.It is shown that bending deformation and the machining error in conditions of reversed turning is much less than that in normal turning. |
| |
| Keywords: | turning slender shaft machining error mechanical model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
