| 高线控冷冷却器流场仿真研究 |
| |
| 引用本文： | 郑福印,王丽萍,邓素怀,王猛,晁月林,史昌.高线控冷冷却器流场仿真研究[J].轧钢,2013,30(5):25-28. |
| |
| 作者姓名： | 郑福印 王丽萍 邓素怀 王猛 晁月林 史昌 |
| |
| 作者单位： | 1. 首钢技术研究院，北京100041 ; 2. 北京首钢股份有限公司第一线材厂，北京100007 |
| |
| 摘 要： | 采用有限元模拟软件Fluent对Morgan-5代、Morgan-6代冷却器进行了三维流场仿真，研究了冷却器结构变化对其压力场、速度场的影响，通过仿真获得两种冷却器的换热系数，进而对冷却器的冷却能力和冷却均匀性进行评估，得出在相同流量、相同内腔尺寸d=Φ17. 5mm的条件下，Morgan-5代冷却器的冷却能力高于Morgan-6代冷却器，在冷却均匀性方面，Morgan-6代冷却器表现更优。
|
| 关 键 词： | 冷却器 流场仿真 冷却能力 冷却均匀性 |
| 收稿时间： | 2013-01-17 |
Simulation of Flow Field of High Speed Wire Cooler |
| |
| ZHENG Fu-yin,WANG Li-ping,DENG Su-huai,WANG Meng,CHAO Yue-lin,SHI Chang.Simulation of Flow Field of High Speed Wire Cooler[J].Steel Rolling,2013,30(5):25-28. |
| |
| Authors: | ZHENG Fu-yin WANG Li-ping DENG Su-huai WANG Meng CHAO Yue-lin SHI Chang |
| |
| Affiliation: | （1.Shougang Research Institute of Technology, Beijing 100041,China ; 2. No. 1 Wire Plant，Beijing shougang Co.,Ltd.,Beijing 100007, China） |
| |
| Abstract: | The finite element Simulation software Fluent was used to Morgan-5 generation and Morgan-6 gener- ation of cooler for three-dimensional flow field simulation. The cooler pressure field and velocity field were af- fected by its structure change. The heat transfer coefficients of two cooler were obtained. Then the cooler cooling capacity and cooling uniformity of two cooler were valuated. The cooling capacity of Morgan-5 genera- tion was higher than Morgan-6 generation under the same flow and the same dimension d~ ~17.5mm. For the cooling uniformity, Morgan-6 cooler was better. |
| |
| Keywords: | cooler finite element simulation cooling capacity pressure field velocity field heat transfer co-efficient |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
