| 应用小波研究动态铣削力及预报铣削颤振 |
| |
| 引用本文： | 石莉,贾春德,孙玉龙.应用小波研究动态铣削力及预报铣削颤振[J].哈尔滨工业大学学报,2006,38(10):1778-1780. |
| |
| 作者姓名： | 石莉 贾春德 孙玉龙 |
| |
| 作者单位： | 1. 沈阳理工大学,高速切削工程技术中心,沈阳,110016
2. 沈阳金杯江森自控汽车内饰件有限公司,沈阳,110168 |
| |
| 基金项目： | 国家“十五”科技攻关项目(18YXSHGY-122) |
| |
| 摘 要： | 在铣削条件下,利用PC I-1712高速数据采集卡进行数据采集,应用小波分析进行数据处理,分析研究了铣削力信号的分解与重构,根据铣削力的主要频率,得到不同频带重构的动态铣削力信号,通过分析重构后的动态铣削力信号,发现产生了铣削颤振,并依据动态铣削力信号概率密度的变化预报颤振原则证明了铣削过程产生了铣削颤振现象,因而可以利用动态铣削力的变化初步预报铣削颤振.
|
| 关 键 词： | 小波分析 动态铣削力 铣削颤振 概率密度 |
| 文章编号： | 0367-6234(2006)10-1778-03 |
| 收稿时间： | 2004-08-20 |
| 修稿时间： | 2004年8月20日 |
Research on dynamic milling force with wavelet analysis and forecasting milling chatter |
| |
| SHI li,JIA Chun-de,SUN Yu-long.Research on dynamic milling force with wavelet analysis and forecasting milling chatter[J].Journal of Harbin Institute of Technology,2006,38(10):1778-1780. |
| |
| Authors: | SHI li JIA Chun-de SUN Yu-long |
| |
| Affiliation: | 1. Engineering and Technology Center for High Speed Machining, Shenyang Ligong University, Shenyang 110016,China;2. Shenyang Jinbei Jonhson Controls A utomadve Interiors Co. Ltd, Shenyang 110168, China |
| |
| Abstract: | The data involved in the course of milling were gathered with High Speed Advantech PCI-1712 card and processed by the method of wavelet analysis.The decomposition and reconstruction of the signals of milling force were analyzed and according to the main frequencies of milling force signals,the reconstructed signals of dynamic milling force in different frequencies were obtained.Through analyzing the signals,milling chatter was found to take place in milling process,which was verified by the forecasting theory of milling chatter based on the varying of probability density of dynamic milling force.All the above results show that milling chatter can be forecasted by the varification of the dynamic milling force. |
| |
| Keywords: | wavelet analysis dynamic milling force cutting vibration probability density |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
