Effects of d.c. current on the phase transformation in 7050 alloy during homogenization

Evolutions of properties and morphologies of secondary phases in 7050 alloy homogenized with direct electric current were studied in detail by conductivity measurement, tensile test and energy dispersive X-ray microanalysis. With increasing temperature, the conductivity decreases, and while the ultimate tensile strength, yield strength and elongation of 7050 alloy increase in alloy homogenized with direct electric current, and reaches the saturation values at 440 °C/2 h. During homogenization, the brighter white AlZnMgCu phase having (weight ratio %) 12.1–15.2Mg, 27.2–32.1Al, 20.9–26.2Cu and 31.4–34.4Zn gradually transforms to the gray phase having (weight ratio %) 10.3–15.1Mg, 41.4–53.7Al, 22.9–35.2Cu and 5.8–13.1Zn and then to the dark gray phase having (weight ratio %) 10.6–14.2 Mg, 38.2–54.9Al, 23.3–44Cu, and 3.6–9.2Zn. With the application of direct electric current, the elemental diffusion network becomes profuse, the amount of gray phase increases, the diffusion of Zn accelerates, the apparent activation of the transformation from AlZnMgCu to Al₂MgCu decreases from 125.52 kJ/mol for the alloy homogenized without direct electric current to 118.82 kJ/mol, and the area fraction of secondary phase decreases by 38% at 450 °C.